超深井提升钢丝绳多层缠绕卷筒的层间过渡装置结构设计  

The Physical Design for the Riser and Filler Rings of Multi-layer Winding Drum in Ultra-deep Mine Hoist

作　　者：彭霞[1] 刘劲军 徐永福 PENG Xia;LIU Jinjun;XU Yongfu(Mechanical and Electrical Engineering College,Shihezi University,Shihezi Xinjiang 832003,China;CITIC Heavy Industries Co.,Luoyang,Henan 471039,China)

机构地区：[1]石河子大学机电学院,新疆石河子832000 [2]中信重工机械股份有限公司,河南洛阳471039

出　　处：《机械设计与研究》2018年第4期177-181,185,共6页Machine Design And Research

基　　金：国家自然科学基金青年科学基金资助项目(51605313)

摘　　要：超深矿井提升多通过钢丝绳多层缠绕实现,多层缠绕钢丝绳需在两个挡绳板位置借助层间过渡装置实现钢丝绳向更高层的爬升、换向。传统的Lebus层间过渡装置在超深、高速、重载的工况下存在磨损大、易在2~3层过渡时卡绳等问题。针对这些问题设计了1种新的层间过渡装置,并结合钢丝绳层间过渡时的运动状态推导出层间过渡装置各部分的参数计算公式。该层间过渡装置的设计思想及其计算公式可为超深矿井提升机多层缠绕卷筒层间过渡装置的设计提供有益参考。The ultra-deep mine achieve hoist by the wire rope multi-layer winding,the wire rope accomplish rising to higher layer through the riser and filler rings. Problems as serious abrasion and locking rope exists in the traditional Lebus device. Aiming at these problems,this paper design a new type riser and filler rings,and deduced the computational formula for the new device combines the kinestate of the wire rope. The design idea and computational formula could providing helpful reference in designing the riser and filler rings on multi-layer winding drum.

关 键 词：超深矿井 多层缠绕 层间过渡 

分 类 号：TH211[机械工程—机械制造及自动化]