检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陆飞 曹芝腑 姜东[2,3] 何顶顶[1] 费庆国[3]
机构地区:[1]东南大学工程力学系,南京210096 [2]南京林业大学机械电子工程学院,南京210037 [3]东南大学机械工程学院,南京211189
出 处:《振动.测试与诊断》2018年第4期712-718,共7页Journal of Vibration,Measurement & Diagnosis
基 金:教育部新世纪优秀人才支持计划资助项目(NCET-11-0086);国家自然科学基金资助项目(11572086;11602112)
摘 要:根据夹持结构存在的局部非线性特点,研究基于非线性动响应的夹持松动识别方法。利用悬臂梁结构在夹持边界条件下自由振动的非线性动响应理论解,将结构非线性响应的二次谐波振幅与基频振幅响应的比例系数r作为松动判别特征量,研究夹持结构的松动特性规律。以夹持悬臂梁结构为研究对象,建立接触有限元模型来计算夹持结构的非线性动响应;同时开展了试验研究,通过不同夹持力下结构振动响应特性来验证该方法的有效性。仿真和试验结果表明,随着夹持力的增加,结构非线性动响应信号的二次谐波振幅呈下降趋势,振幅比值r呈幂指数下降。二次谐波振幅与基频振幅的比值r可以作为表征结构松动状态的判据。Looseness identification of clamped structures based on nonlinear dynamic response is investigated in this paper,according to local nonlinearities in clamped structures.The theoretical solution of the nonlinear free vibration of a cantilever beam is utilized with clamped boundary conditions.The ratio between the second harmonic and the fundamental frequency amplitudesis denoted as r,which is a characteristic quantity to investigate the loosening laws of clamped structures.Aiming at the clamped beam,the nonlinear dynamic response is solved by the contact finite element model.Meanwhile,characteristics of the dynamic responses are analyzed based on structural experiments with different clamping force to verify the method.Numerical and experimental results show that the second harmonic amplitude of the nonlinear response decreases when the clamping force increases,and ralso decreases with the increasing the clamping force,according to the exponent relationship of the power.Therefore,ris an effective characteristic quantity for identifying the state of clamped structure.
分 类 号:TH131.9[机械工程—机械制造及自动化] O327[理学—一般力学与力学基础]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.43