检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:苏娟[1,2] 焦明星[1] 张凌晨 邢俊红[1] SU Juan;JIAO Mingxing;ZHANG Lingchen;XING Junhong(School of Mechanical and Precision Instrument Engineering,Xi'an University of Technology,Xi'an 710048,China;Key Laboratory of Photoelectric Logging and Detecting of Oil and Gas,Ministry of Education,Xi'an Shiyou University,Xi'an 710065,China)
机构地区:[1]西安理工大学机械与精密仪器工程学院,陕西西安710048 [2]西安石油大学光电油气测井与检测教育部重点实验室,陕西西安710065
出 处:《西安理工大学学报》2018年第2期199-204,共6页Journal of Xi'an University of Technology
基 金:国家自然科学基金资助项目(51175421;61205135)
摘 要:Pound-Drever-Hall(PDH)稳频系统利用了调制光谱技术和外差探测技术,将激光频率锁定在F-P参考腔的中心频率上以实现稳频。鉴频曲线的线性区为PDH系统的频率快速捕获区。在此区域内,PDH误差信号与激光频率差成正比。本文建立了该频率快速捕获区的PDH稳频系统线性化复频域模型,研究了系统的稳定性和稳态误差。F-P参考腔作为稳频基准,其干扰对系统稳频性能影响极大。将F-P参考腔干扰作为噪声源,分析了系统的扰动误差。分析了系统动态性能,研究了频率锁定的暂态响应过程,给出了系统参数设计依据。The Pound-Drever-Hall(PDH)laser frequency stabilization system is based on frequency modulation spectroscope technology and optical heterodyne detection technology,locking laser frequency at the centre frequency of F-P reference cavity.The linear region of frequency discrimination curve is in a fast frequency pull-in range.In this zone,the PDH error is proportional to the frequency bias,with a linearized complex frequency domain control model of PDH laser frequency stabilization system developed.Based on the model,the stability and steady-state error is analyzed.Serving as the frequency standard,the instability of F-P reference cavity limits the frequency stabilization accuracy greatly.The perturbation error caused by noises of F-P reference cavity is analyzed,with the dynamic characteristic and transient response process studied.A guideline for the parameter selection of PDH laser frequency stabilization system is given.
关 键 词:Pound-Drever-Hall稳频 线性化复频域模型 稳态误差 扰动误差 暂态响应
分 类 号:TN249[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28