检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙丽霞[1,2] 廖丹葵 王坤[1] 孙建华 童张法[1,2] SUN Lixia;LIAO Dankui;WANG Kun;SUN Jianhua;TONG Zhangfa(School of Chemistry and Chemical Engineering,Guangxi University,Nanning 530004,Guangxi,China;Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology,Nanning 530004,Guangxi,China)
机构地区:[1]广西大学化学化工学院,广西南宁530004 [2]广西石化资源加工及过程强化技术重点实验室,广西南宁530004
出 处:《化工学报》2018年第7期2822-2828,共7页CIESC Journal
基 金:广西自然科学基金项目(2015GXNSFBA139034);广西石化资源加工及过程强化技术重点实验室开放基金资助项目(2015K005)~~
摘 要:用Dvorak-Boublik双循环汽液平衡釜测定了三元体系α-蒎烯(1)+β-蒎烯(2)+对伞花烃(3)在53.3和80.0 k Pa下的汽液平衡数据,采用Mc Dermott-Ellis对三元体系的实验数据进行热力学一致性检验,所有数据均通过一致性检验。采用相关二元体系的NRTL模型参数预测α-蒎烯+β-蒎烯+对伞花烃三元体系在53.3和80.0 k Pa下的汽液平衡数据。结果表明:三元体系在两个压力下平衡温度的最大绝对偏差分别是0.80和0.86 K,平均绝对偏差分别为0.30和0.39 K。该体系在53.3 k Pa下α-蒎烯和β-蒎烯在汽相中的最大绝对偏差分别为0.0096和0.0102,平均绝对偏差分别为0.0033和0.0028;在80.0 k Pa下α-蒎烯和β-蒎烯在汽相中的最大绝对偏差分别为0.0083和0.0081,平均绝对偏差为0.0049和0.0025。实验结果为松节油体系主要成分的分离提纯提供了基础数据。Vapor-liquid equilibrium (VLE) data for ternary system of α-pinene(1) + β-pinene(2)+ p-cymene(3) were measured at 53.3 kPa and 80.0 kPa using the modified Dvorak-Boublik equilibrium still. The experimental data of ternary systems were found to be thermodynamically consistent by the McDermott-Ellis method. The ternary system data at reduced pressure were predicted with the parameters of NRTL model obtained from the pertinent binary systems. The maximum absolute deviations in temperature at two pressures were 0.80 and 0.86 K respectively, average absolute deviations were 0.30 and 0.39 K respectively. The ternary absolute deviation and average absolute deviation in vapor-phase mole fraction of α-pinene were 0.0096 and 0.0033 respectively, and those of β-pinene were 0.0102 and 0.0028 respectively at 53.3 kPa. The max absolute deviation and average absolute deviations in vapor-phase mole fraction of α-pinene were 0.0083 and 0.0049 respectively, and those of β-pinene were 0.0081 and 0.0025 respectively at 80.0 kPa. These results provide the basis data for the separation of main components of turpentine.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15