梁式转换层高低位转换基于ABAQUS抗震性能分析  

Seismic Behavior Researches about the High-low Girder Transfer Storey Based on ABAQUS

作　　者：张爱萍 陈艳 ZHANG Aiping;CHEN Yan(College of Architectural and Environmental Engineering,Chengdu Technological University,Chengdu 611730;Department of Road and Architecture,Shandong Transport Vocational College,Weifang 261206)

机构地区：[1]成都工业学院建筑与环境工程学院,四川成都611730 [2]山东交通职业学院公路与建筑学院,山东潍坊261206

出　　处：《福建建筑》2018年第8期65-69,共5页Fujian Architecture & Construction

摘　　要：高层建筑梁式转化层结构刚度过大,易形成"强梁弱柱";而刚度过小,又易于形成结构薄弱层,对抗震不利,依据《建筑抗震设计规范》(GB50011-2010)及《高层建筑混凝土结构技术规程》(JGJ3-2010)中转换层设置等相关规定,采用有限元计算软件ABAQUS中塑性损伤模型建立高低位两跨梁式转换层结构数值模型,施加"荷载-位移"控制荷载,分析框支剪力墙高低位转换结构在受力、变形特征和塑性损伤等方面的规律,探讨转换层结构高低位的抗震性能,提出相关改进措施,提高转换层结构耗能性。Supported system used in most of the girder transfer storey construction in high rise buildings can easily form a ＂ strong beam weak column＂ and weak layers which may cause bad effects on the seismic. Based on the rules provided in the＂Code for seismic design of building＂（ GB50011-2010） and ＂Technical specification for concrete structures of tall building＂（ JGJ3-2010）,ABAQUS was adopted to build the plastic damage models in this paper and some significant results were gained which are regarding to the high-low girder transfer story with by applying different load control. Combining with the numerical model analysis,it can draw the conclusions about load-deflection performance,typical failure modes,stress distribution and the energy-dissipation capacity and so forth,also it puts forward relevant improvement measures in order to improve the dissipation capacity about girder transfer components.

关 键 词：梁式转换层 高低位转换 变形特征 抗震耗能性 

分 类 号：TU3[建筑科学—结构工程]