一种高效快速稳定压电能量存储电路  

A high efficient fast and stabilized piezoelectric energy storage circuit

作　　者：王根圣 陈荷娟[1] 蔡建余[1,2] 孙加存 WANG Gen-sheng;CHEN He-juanI;CAI Jian-yu;SUN Jla-cun(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China;Nanjing Polytechnic Institute,Nanjing 210048,China;School of Electronic and Information Engineering,Suzhou Vocational University,Suzhou 215000,China)

机构地区：[1]南京理工大学机械工程学院,江苏南京210094 [2]南京科技职业学院,江苏南京210048 [3]苏州市职业大学电子信息工程学院,江苏苏州215000

出　　处：《传感器与微系统》2018年第8期67-69,共3页Transducer and Microsystem Technologies

基　　金：国家自然科学基金资助项目(51377084);江苏省自然科学基金资助项目(BK20160296)

摘　　要：针对压电能量采集技术对高效与快速稳定的实际需求,基于串联电感开关同步电荷采集电路(S-SSHI)研究,改进设计了一种高效快速的无源S-SSHI。确定压电换能器等效电路,对改进无源S-SSHI电压稳定响应时间和输出功率进行模拟仿真和实验分析。结果表明:电路在低负载(小于20 kΩ)的情况下有较高的能量输出,达51.243 m W,是经典电路最高输出功率的4.95倍,具有电压响应稳定、时间快的特点。高功率和快速稳定的特征将为无线网络节点供能的工程设计提供理论依据。Aiming at high efficient, fast and stable utility requirements of piezoelectric energy acquisition technology,design a fast and efficient passive series-synchronous switching harvesting on inductor（S-SSHI） based on the research of S-SSHI. The equivalent circuit of the piezoelectric transducer is determined, and the voltage stable response time and output power of the improved passive S-SSHI are simulated and analyzed. The results show that the circuit has a higher energy output,up to 51. 243 mW,in the case of low load （ 〈 20 KΩ） which is 4.95 times the highest classical circuit ;it also has stable voltage and quick response time characteristics. High power and fast stable features will provide a theoretical basis for energy-supply engineering design of wireless network nodes.

关 键 词：压电换能器 峰值检测开关 无源同步 能量采集电路 

分 类 号：TM282[一般工业技术—材料科学与工程]