一种毫米波复合波导天线零件高压水去毛刺技术研究  

Research on High Pressure Water Deburring Technology for Millimeter Wave Composite Waveguide Antenna Parts

作　　者：王志鹏[1] 杨文静[1] 曹来东 肖爱群 王建华[1] Wang Zhipeng;Yang Wenjing;Cao Laidong;Xiao Aiqun;Wang Jianhua(Beij ing Huahang Radio Measurement ＆ Research Institute,Beijing 100013)

机构地区：[1]北京华航无线电测量研究所,北京100013

出　　处：《航天制造技术》2018年第4期30-32,共3页Aerospace Manufacturing Technology

摘　　要：针对某毫米波复合波导天线零件加工后毛刺多,且与基体附着力强,提出了新的去毛刺要求。通过高压水去毛刺技术实现了"十"字缝、缝隙、功分枝节、窄细筋壁直角等典型结构边缘毛刺的完全去除,零件表面没有损伤,腔体锐边保持完好,解决了该类复合波导天线零件毛刺去除的技术难题。Some millimeter wave composite waveguide antenna parts have many burrs strongly adhering to the substrate after processing. A new deburring requirement is proposed. The high-pressure water deburring technology realizes the complete removal of the edge burrs of the typical structure such as the ＂ten＂ seam, the gap, the branch of the work, and the right angle of the narrow and thin ribs. The surface of the part is not damaged, and the sharp edge of the cavity remAlns intact. The technical problem of burr removal of composite waveguide antenna parts is solved.

关 键 词：毫米波 复合波导天线 高压水 去毛刺 

分 类 号：TJ760.5[兵器科学与技术—武器系统与运用工程]