轧辊交叉对中间坯镰刀弯生成过程的影响  

Influence of crossed roller on generating camber in hot rough rolling

作　　者：徐冬[1] 代振洋 刘洋[1] 杨荃[1] 王晓晨[1] 孙友昭[1] 刘克东[1] XU Dong;DAI Zhen-yang;LIU Yang;YANG Quan;WANG Xiao-chen;SUN You-zhao;LIU Ke-dong(National Engineering Research Center of Flat Rolling Equipment,University of Science and Technology Beijing,Beijing 100083,China)

机构地区：[1]北京科技大学国家板带生产先进装备工程技术研究中心

出　　处：《工程科学学报》2018年第8期954-960,共7页Chinese Journal of Engineering

基　　金：国家自然科学基金资助项目(51604024);清华大学摩擦学国家重点实验室开放基金资助项目(SKLTKF16B11);中央高校基本科研业务费专项资金资助项目(FRF-TP--17--002A2);北京市自然科学基金资助项目(3182026)

摘　　要：粗轧过程中出现的轧辊两侧轴承间隙差异较大的情况,会造成轧辊交叉,导致板带两侧轧制力失衡,进而引起或加剧中间坯的镰刀弯缺陷,影响最终产品质量精度和后续精轧的轧制稳定性.为研究轧辊交叉对中间坯镰刀弯生成过程的影响,建立了轧辊交叉、偏移的轧件-辊系耦合动态有限元模型,利用模型分析了不同工况条件下,轧辊交叉位置、交叉角度对中间坯楔形、弯曲量及两侧轧制力差的影响,进而总结了由轴承间隙引起的轧辊非对称交叉对中间坯镰刀弯弯曲量的影响规律.结果表明：镰刀弯弯曲量与交叉角、交叉位置比分别呈线性关系,与辊系间隙比呈二次曲线关系.The shape of a hot rolled strip is a main indicator of its quality,and camber is a significant defect arising from problems in shape quality.Differences in the bearing clearance of the two sides of a rough mill can cause a crossed roller,which leads an imbalance in the rolling force and,thereby,camber.A camber defect adversely affects product quality and the stability of the subsequent finish-rolling production process.The simulation and control of asymmetric shapes is one of the hottest topics in the field of modern strip rolling.To solve this problem and enhance the quality and precision of the strips produced,exploring and analyzing the problem of camber in hot rough rolling is necessary.This study investigated the generation of camber in the 1580 mm roughing mill R2 of a steel plant during the hot-continuous-rolling process.This paper established a three-dimensional elastic-plastic dynamic coupling model of the rolls and slab using the finite element（FE） analysis software ABAQUS/Explicit.In addition,the paper used a data analysis method based on the node-set coordinate output.By balancing the relationship between computational precision and efficiency,the study found the FE model to run stably.Using the proposed model,the paper systematically investigated the influence of cross position and angle on the camber,slab wedge,and amount of rolling force under different conditions.Based on the FE results,the paper then characterized the influence law for the occurrence of a cross roll with respect to bearing clearance and slab camber.Numerical examples demonstrate that the relationship between the camber and cross-angle position is linear,and that between the slab camber and clearance is a quadratic curve.

关 键 词：热轧粗轧 镰刀弯 轧辊交叉 有限元 影响分析 

分 类 号：TG335.5[金属学及工艺—金属压力加工]