糠醛抽提-加氢组合工艺生产橡胶增塑剂的研究  

Study on the Production of Rubber Plasticizer by the Combined Process of Furfural Extraction and Hydrotreating

作　　者：蔡烈奎 张卉 马莉莉 杨文中[2] CAI Lie-kui;ZHANG Hui;MA Li-li;YANG Wen-zhong(CNOOC Research Institute of Refining and Petrochemicals,Qingdao 266500,China;CNOOC Oil ＆ Petrochemicals Co.,LTD.,Beijing 100029,China)

机构地区：[1]中海油炼油化工科学研究院 [2]中海石油炼化有限责任公司

出　　处：《润滑油》2018年第4期53-58,共6页Lubricating Oil

基　　金：中海油总公司级科研项目;项目编号CNOOC-KJ125 ZDXM 17 LX 11 QDZX 2011

摘　　要：以中海油绥中36-1减三馏分油为原料,在实验室采用两段糠醛抽提工艺和两段糠醛抽提+加氢精制组合工艺进行生产高芳烃橡胶增塑剂的研究。结果表明,采用两段糠醛抽提+加氢精制组合工艺可以生产CA值高达25%以上的橡胶增塑剂产品;生产C_A值21%以上的橡胶增塑剂其收率占减三馏分油的43%以上,其各项性质满足国标GB/T 33322-2016《橡胶增塑剂芳香基矿物油》A1820的指标要求。In this paper,using CNOOC SZ36-1 vacuum distillate cut three as raw material,the rubber plasticizer was produced by the combined process of two stage furfural extractions and hydrotreating. The results show that,the combined process can produce the rubber plasticizer which CAvalue is more than 25%. The yield of rubber plasticizer which CAvalue is 21% is 43% from vacuum distillate cut three. The properties meet the A1820 indexes of national standard GB/T 33322-2016 Rubber Plasticizer —Aromatic Base Mineral Oil.

关 键 词：糠醛抽提 加氢精制 橡胶增塑剂 

分 类 号：TE626.39[石油与天然气工程—油气加工工程]