检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张坤勇[1,2,3] 李威[1,3] Charkley Nai Frederick 陈恕 ZHANG Kun-yong;LI Wei;Charkley Nai Frederick;CHEN Shu(Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering,Hohai University,Nanjing,Jiangsu 210098,China;Jiangsu Research Center for Geotechnical Engineering Technology,Hohai University,Nanjing,Jiangsu 210098,China;Institute of Geotechnical Engineering,Hohai University,Nanjing,Jiangsu 210098,China)
机构地区:[1]河海大学岩土力学与堤坝工程教育部重点实验室,江苏南京210098 [2]河海大学江苏省岩土工程技术工程研究中心,江苏南京210098 [3]河海大学岩土工程科学研究所,江苏南京210098
出 处:《岩土力学》2018年第9期3270-3276,共7页Rock and Soil Mechanics
基 金:国家自然科学基金项目(No.41530637,No.51578214); 中央高校基本科研业务费专项资金项目(No.2015B17714)
摘 要:对土石坝心墙掺砾黏土开展模拟心墙单元小主应力方向加载的真三轴试验,首先对试样进行不同围压条件下等向固结,然后保持小主应力恒定,通过调整大主应力和中主应力,以模拟土石坝竣工后的初始三向应力状态。试验过程中保持大主应力和中主应力恒定,从小主应力方向单向加载,以模拟土石坝蓄水过程中心墙单元所经历的应力路径。试验结果与常规三轴试验以及复杂应力条件下大主应力方向真三轴加载试验结果都有显著不同。不同初始应力条件下,不同主应力方向的初始切线模量和初始切线泊松比的变化规律非常复杂,应力–应变显现出明显的各向异性。在心墙堆石坝施工过程及蓄水过程中,心墙单元所经历的应力路径明显不同,合理的土体本构模型应该对这种由于加荷路径不同所引起的不同方向模量和泊松比进行合理描述。True triaxial tests on clay mixed with gravel were carried out under complex stress state to simulate the loading process of core wall elements under water storage process, and loading was applied from the minor principal stress direction. Under initial state, the major principal stress and the second principal stress were adjusted with constant minor principal stress; initial anisotropic stress state was reached to simulate the stress state of dam elements. The major principal stress and second principal stress were then kept constant. Minor principal stress increment was applied to simulate the stress path that core wall elements go through during the process of water storage. Test results show significant differences compared with the result of conventional triaxial tests and true triaxial tests loading from major principal stress direction. Under different initial stress conditions, the initial tangent modulus and initial Poisson's ratio of the principal stress direction are very complex, and the stress-strain curve shows obvious anisotropy. In the process of core wall rockfill dam construction and the water storage process, the stress path experienced by the core wall unit is obviously different. The reasonable soil constitutive model should be used to describe the modulus and Poisson's ratios caused by the different loading paths.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.44