2800 mm中厚板轧机平面形状控制系统存在问题以及改善  

Improvement and Problem of Plan View Control System of 2800mm Plate Rolling Mill

作　　者：李磊 LI Lei(Liuzhou Iron and Steel Co.,Ltd.,Liuzhou,Guangxi,545002,P.R.China)

机构地区：[1]柳州钢铁股份有限公司,广西柳州545002

出　　处：《南方金属》2018年第5期39-41,共3页Southern Metals

摘　　要：在2 800 mm中厚板粗轧机平面形状控制系统主要原理和特点基础上,针对该系统使用过程中存在的问题,提出了对应的解决措施.改善后,效果良好,有效促进了成材率和命中率的提升.Based on the main principles and features of the plan view control system cun＇ently used on the 2800 roughing mill, the corresponding solutions were proposed according to the problems of the system. The improving effect is good after optimization, which effetely promotes the rate of finished products.

关 键 词：平面形状控制系统 头中尾宽差 尾部圆头 狗骨不对称 

分 类 号：TG335.52[金属学及工艺—金属压力加工]