Improved water-splitting performances of CuW_(1-x)Mo_xO_4 photoanodes synthesized by spray pyrolysis  

通过喷雾热裂解法合成而改进的CuW_(1-x)Mo_xO_4光阳极的分解水性能（英文）

作　　者：Qing Liang Yongsheng Guo Ningsi Zhang Qinfeng Qian Yingfei Hu Jianqiang Hu Zhaosheng Li Zhigang Zou 梁晴;郭永胜;张宁斯;钱勤枫;胡颖飞;胡建强;李朝升;邹志刚(Collaborative Innovation Center of Advanced Microstructures, National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Nanjing University;Jiangsu Key Laboratory for Nano Technology, Department of Physics, Nanjing University)

机构地区：[1]Collaborative Innovation Center of Advanced Microstructures,National Laboratory of Solid State Microstructures,College of Engineering and Applied Sciences,Nanjing University,Nanjing 210093,China [2]Jiangsu Key Laboratory for Nano Technology,Department of Physics,Nanjing University,Nanjing 210093,China

出　　处：《Science China Materials》2018年第10期1297-1304,共8页中国科学（材料科学（英文版）

基　　金：supported by the National Basic Research Program of China (973 Program, 2013CB632404);National Natural Science Foundation of China (21473090 and 51272102);a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions

摘　　要：CuW（1-x）MoxO4 solid solution of CuWO4 and CuMoO4, which is a copper-based multi-component oxide semiconductor, possesses much narrower band gap than CuWO4. In theory, it can absorb a larger part of the visible spectrum, widening the use of solar spectroscopy and obtaining a higher photo-to-chemical conversion efficiency. In this study, CuW（1-x）MoxO4 thin-film photoanodes on conducting glass were prepared using a simple and low-cost spray pyrolysis method. The resulting CuW（1-x）MoxO4 photoanodes perform higher photocurrent than CuWO4 photoanodes under AM 1.5 G simulated sunlight illumination（100 m W cm^（-2））in 0.1 mol L^（-1） phosphate buffer at pH 7. Combined with IPCE and Mott-Schottky analysis, the enhancement of the photocurrent is due to the improvement of photon utilization and the increase of carrier concentration with the incorporation of Mo atoms. Moreover, with the optimal Mo/W atomic ratio,the photocurrent density increases obviously from 0.07 to 0.46 m A cm^（-2） at 1.23 V（RHE） bias. In addition, compared with particle-assembled thin-film photoanodes prepared by solidphase reaction and drop-necking treatment, the photoanodes prepared by spray pyrolysis have obvious advantages in terms of reducing resistance and facilitating charge transport.CuWO_4和CuMoO_4的固溶体CuW_(1-x)Mo_xO_4是一种铜基多组分氧化物半导体,拥有比CuWO_4更窄的带隙.理论上,它可以拓宽对太阳光谱的响应范围,吸收更大部分的可见光,获得更高的太阳能-化学能转换效率.本研究通过简单、低成本的喷雾热裂解法在导电玻璃上制备了CuW_(1-x)Mo_xO_4薄膜光阳极.在AM 1.5G模拟太阳光(100 m W cm^(-2))照射下,制备出的CuW_(1-x)Mo_xO_4光阳极在pH 7的0.1 mol L^(-1)磷酸缓冲液中产生了比CuWO_4光阳极更高的光电流.结合IPCE和莫特-肖特基分析可知,光电流的增长来源于Mo原子的加入所造成的光子利用率的提高以及载流子浓度的增加.而且,在最优的Mo/W原子比例下,1.23 V_(RHE)偏压时的光电流从0.07 m A cm^(-2)显著地增加到0.46 m A cm^(-2).与对应的颗粒组装薄膜光阳极(通过固相反应结合涂覆-粘结后处理得以制备)相比较,喷雾热裂解法所制备的光阳极有利于降低电阻和促进电荷传输.

关 键 词：CuWO4 CuW（1-x）MoxO4 photoelectrochemical watersplitting PHOTOANODE 

分 类 号：O646.542[理学—物理化学] TQ116.2[理学—化学]