烧成制度和工艺条件对祭红釉影响  

Effect of firing system and process conditions on red glaze

作　　者：包启富 董伟霞 周健儿 BAO Qi-fu;DONG Wei-xia;ZHOU Jian-er

机构地区：[1]景德镇陶瓷大学材料与工程学院,江西景德镇333001

出　　处：《砖瓦》2018年第10期41-43,共3页Brick-tile

基　　金：国家自然科学基金项目(51562013)

摘　　要：以釉果、氧化铜、石英、玻璃粉和碳酸钡等为主要原料,在还原气氛下烧成,制备出釉面为血红色且表面光滑的祭红釉。采用单因素实验法探讨了烧成制度和工艺条件对祭红釉釉面效果的影响。研究结果表明:在烧成温度为1280℃,球磨时间为20min,釉层厚度为0.6mm^0.8mm的工艺条件下,获得了釉面为色沉安定的祭红釉。The sacrificial red glaze is prepared by using glaze fruit, copper oxide, quartz, glass powder and barium carbonate as main raw material, firing in reducing atmosphere, which shows bleeding red and smooth surface. Effects of firing system and process condition on sacrificial red glaze are studied using the single factor experiments. The results showed that： the best condition for sacrificial red glaze is obtained as follows： firing temperature of 1280℃, milling time of 20 min, glaze thickness of 0.6 mm-0.8 mm process conditions.

关 键 词：祭红釉 单因素法 烧成制度 工艺因素 

分 类 号：TU522.064[建筑科学—建筑技术科学]