检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄清华[1] 赵星[1] 郑霞[1] 李新功[1] HUANG Qinghua;ZHA;ZHENG Xia;LI Xingong(Academy of Materials Science and Engineering,Central South University of Forestry and Technology,Changsha 410004,China)
机构地区:[1]中南林业科技大学材料科学与工程学院,湖南长沙410004
出 处:《新型建筑材料》2018年第9期25-29,共5页New Building Materials
基 金:湖南省教育厅项目(17C1661);湖南省重点研发项目(2016NK2144)
摘 要:为降低人造板制造成本,提高竹材加工利用率,以竹刨花和自制无机胶黏剂为原料,通过热压工艺制备了硅镁水泥竹刨花板。研究了施胶量、热压时间和温度对板材密度及其性能的影响。结果表明,试验范围内,随着施胶量增大、热压温度升高和热压时间延长,板材的静曲强度、弹性模量均先提高后降低,内结合强度逐渐提高,24 h吸水厚度膨胀率逐渐减小;随着板材密度的增大,硅镁水泥竹刨花板的静曲强度、弹性模量和内结合强度逐渐提高,24 h吸水厚度膨胀率逐渐减小。硅镁水泥竹刨花板优化制板工艺参数为:施胶量45%,热压温度110℃,热压时间9 min,板材密度1.1 g/cm^3。In order to reduce the manufacturing cost of wood-based panel and improve the processing and utilization rate of bamboo resources,with bamboo particle and silicon magnesium inorganic adhesives as raw materials, cement particleboard was manufactured by hot-pressing technology. The effect of adhesives consumption,hot pressing time and hot pressing temperature on plate density and the board properties was studied. Results showed that the cement particleboard modulus of rupture,modulds of elasticity firstly increase then decreased and internal bond strength gradually increase while thickness swelling in 24 h gradually decreased with increase of adhesives consumption,hot pressing temperature and hot pressing time: modulus of rupture,modulus of elasticity,and internal bond strength of the board gradually increase while thickness swelling in 24 h gradually decrease. Optimal process was as follows: density of 1.1 g/cm^3, hot-pressing temperature of 110℃ and hot-pressing time of 9 min,adhesive consumption of 45%.
分 类 号:TU525.2[建筑科学—建筑技术科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.130