磁电雷管结构及生产工艺的优化设计  

Optimum Design of Structure and Production Process of Magnetic Electric Detonator

作　　者：秦卫东 刘文生 张艳 张东平 QING Weidong;LIU Wensheng;ZHANG Yan;ZHANG Dongping(Jiangxi Xinyu Guotai Specialty Chemicals Co.,Ltd（Jiangxi Xinyu,33800)

机构地区：[1]江西新余国泰特种化工有限责任公司,江西新余338000

出　　处：《爆破器材》2018年第5期44-48,共5页Explosive Materials

摘　　要：为解决当前磁电雷管生产工艺复杂、成本较高的问题,设计了一种新型磁电雷管。首先,阐述了磁电雷管的设计原理。在此基础上,分析了感应电流I2与次级绕组匝数n_2、次级端脚线及桥丝电阻R_2、磁导率μ、电流频率f的关系,确定了n_2、R_2、μ和f等的取值。生产中,采用了磁环、脚线定位注塑措施;确定了磁电雷管的磁环材料,初、次级绕组匝数和电线材质;优化了点火药配方和桥丝的直径,点火药选择m(苦味酸钾)m(高氯酸钾)=47. 3044. 65的零氧配方,桥丝直径为0. 03 mm,解决了规模生产的一致性问题。结果表明:本产品生产工艺简单,能够实现大批量生产,同时具有很强的可靠性,满足了行业的需求。A new kind of magnetic electric detonator was designed with respect to the challenges of complex produc-tion process and high cost in current production of magnetic electric detonator. Design principle of the magnetic electricdetonator was introduced at first. Based on this, relationship between inductive current I2 and number of secondary windingturns n2 , inductive current I2 and bridge wire resistance R2 , induced current I2 and magnetic conductivity μ, inductivecurrent I2 and current frequency f were analyzed and the value of n2 , R2 , μ and f were determined. Magnet ring, wirepositioning and mold injection were used in the production. Magnet ring material, number of primary or secondary windingturns, and wire material were also determined. Ignition formula and diameter of bridge wire were optimized. Zero oxygenbalance was chosen in the ignition, in which m（potassium picrate）︰m（potassium hyperchlorate） = 47. 30︰44. 65. Dia-meter of bridge wire was 0. 03 mm. Consistency of scale production has been solved. All the results show that this produc-tion process is simple and could achieve large scale production, and it has a high reliability. It could meet the needs ofvarious industries simultaneously.

关 键 词：磁电雷管 电感量 磁环 引火药头 

分 类 号：TD235.22[矿业工程—矿井建设]