检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王晓龙[1] 刘蓉[1] 纪龙[2] 郜时旺[1] 姜宁[3] WANG Xiaolong;LIU Rong;JI Long;GAO Shiwang;JIANG Ning(Beijing Key Laboratory of CO2 capture and treatment(China Huaneng Group Clean Energy Research Institute),Changping District,Beijing 102209,China;China University of Mining & Technology Beijing,Haidian District,Beijing 100083,China;State Key Laboratory of clean coal-based energy(Xi'an Thermal Power Research Institute),Xi'an 710054,Shaanxi Province,China)
机构地区:[1]二氧化碳捕集与处理北京市重点实验室中国华能集团清洁能源技术研究院有限公司,北京市昌平区102209 [2]中国矿业大学北京化学与环境工程学院,北京市海淀区100083 [3]煤基清洁能源国家重点实验室西安热工研究院有限公司,陕西省西安市710054
出 处:《中国电机工程学报》2018年第19期5787-5794,共8页Proceedings of the CSEE
基 金:山西省科技厅课题(MD-2015-05)~~
摘 要:提出了采用可循环碳酸盐混合物促进粉煤灰在液相中捕集封存燃煤烟气中CO2的工艺,考察了3种中国粉煤灰的矿化性质,并对神府煤粉煤灰做了重点研究,考察不同添加剂、Na2CO3浓度、不同气氛、固液比、搅拌速度、温度等参数对神府煤粉煤灰矿化反应的影响。提出了以碳酸盐混合物为添加剂的新思路,并实验验证了添加剂循环使用的途径和方法。试验选取Ca转化率(ζCa)和产物中的CaCO3含量两个指标对矿化效果进行评价。采用XRD和SEM对粉煤灰进行物相分析和形貌分析,采用TGA测定反应后固体产物中二氧化碳的吸收量,采用总碳和无机碳分析仪对试验所得液体产物进行碳含量分析。结果表明固液比、搅拌速度对ζCa的影响非常小,而提高反应温度能显著提高ζCa。当以Na2CO3为添加剂时,矿化效果最好,Na2CO3的最佳浓度为0.5mol/L,Na2CO3在矿化过程中可以再生从而实现循环利用。This paper introduced a new aqueous mineralization process using fly ash and recyclable carbonate salts to capture and storage CO2 from flue-gas. The carbonation performance of three different Chinese fly ash were studied, especially the one from Shenfu coal. The mineralisation process was optimized by different additives, the concentration of Na2CO3, different atmosphere, solid to liquid ratio, stirring rate and reaction temperature to improve the understanding of the effect of various operating parameters on carbonation efficiency. The carbonate salts were introduced as additives and can be regenerated in multi-cycle process, making the reaction more efficient. The total calcium content (Catot~) and the carbonation efficiency (ζca) were used to determine the perfomance of the carbonation. The crystalline phases and the structure of the raw materials were determined by XRD and SEM. The amount of CO2 in the carbonated product was determined by TGA. Total carbon and inorganic carbon (TIC) was determined by a Shimadzu TOC-L CPH analyser. The results showed the stirring rate and solid/liquid ratio have very small influence on carbonation efficiency and increasing the temperature can significantly improve carbonation efficiency. The results indicated that the highest carbonation efficiency was reached in the presence of 0.5mol/L Na2CO3. The multiple-cycle experiments showed that Na2CO3 facilitated the precipitation of calcium carbonate and was well regenerated in the process.
分 类 号:X701[环境科学与工程—环境工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145