脱氧工艺对60Si2MnA弹簧钢非金属夹杂物的影响  

EFFECT OF DEOXIDIZATION PROCESS ON NON-METALLIC INCLUSIONS OF SPRING STEEL 60Si2MnA

作　　者：刘泳 赵江 王国营 马超 Liu Yong;Zhao Jiang;Wang Guoying;Ma Chao(HBIS Group Research Institute,Shijiazhuang,Hebei,050023;HBIS Group Hansteel Company,Handan,Hebei,056015;HBIS Group Research Institute,Shijiazhuang,Hebei,050023)

机构地区：[1]河钢集团钢研总院,河北石家庄050023 [2]河钢集团邯钢公司,河北邯郸056015 [3]河钢集团石钢公司,河北石家庄050011

出　　处：《河北冶金》2018年第10期28-33,共6页Hebei Metallurgy

摘　　要：分别采用铝脱氧和硅脱氧工艺,对60Si2MnA弹簧钢进行脱氧处理,详细分析了钢中夹杂物的类型、粒度分布,以及氧含量。当采用铝脱氧工艺时,钢中的全氧含量明显低于硅脱氧工艺,而且B类、D类及Ds类夹杂物的级别高于硅脱氧工艺。经过铝脱氧工艺处理后,点状夹杂物尺寸集中分布在10～20μm范围内;硅脱氧工艺对应的点状夹杂物尺寸则小于10μm,但存在块状钛类夹杂物。通过综合比较认为,生产60Si2MnA弹簧钢时应该优先选择硅脱氧工艺。The spring steel 60Si2MnA was deoxidized by aluminum deoxidization and silicon deoxidization respectively. And the types, particle size distribution and oxygen content of inclusions in the steel were analyzed in details. The oxygen content of aluminum deoxidation process is obviously lower than that in silicon deoxidation process, and the inclusion level of class B, D and Ds is higher than that in the silicon deoxidation process. After aluminium deoxidization, the size of dot inclusion is d in the range of 10~20 μ m, while the size of dot inclusion corresponding to silicon deoxidization is less than 10 μ m, but there are massive Ti type inclusion. Through comprehensive comparison, it is considered that the silicon deoxidation process should be preferred when producing 60Si2MnA spring steel.

关 键 词：脱氧工艺 弹簧钢 非金属夹杂物 影响 

分 类 号：TG142.41[一般工业技术—材料科学与工程]