低功耗单跳网络实测数据能耗优化方法仿真  

Energy Consumption Optimization Method Simulation for Low-Power Single-hop Network Measurement Data

作　　者：赵倩倩[1] ZHAO Qian - qian(Physical Education College of Zhengzhou University, Zhengzhou Henan 450044,China)

机构地区：[1]郑州大学体育学院,河南郑州450044

出　　处：《计算机仿真》2018年第10期325-328,332,共5页Computer Simulation

摘　　要：对单跳网络实测数据能耗进行优化能够降低数据实测时对单跳网络的影响,保证单跳网络正常运行。针对当前单跳网络实测数据能耗优化方法存在的节能效果较差,且对单跳网络数据实测速度和传递成功率影响较大问题,提出一种基于最优停止规则的低功耗单跳网络实测数据能耗优化方法,根据单跳网络结构确定数据实测时单跳网络信号衰减系数,通过研究单跳网络实测数据主体,优化实测数据能耗模型,确定节点通信单元能耗,并引入信号衰减系数确定单跳网络实测数据总能耗。根据最优停止规则推导出单跳网络发送终端的最优停止规则和最优能耗效率,建立单跳网络实测数据能耗最小问题模型,将实测数据总能耗引入到模型中,实现低功耗单跳网络实测数据能耗优化。实验结果表明,所提方法降低了数据实测时的能耗,且对数据实测速度和传递成功率影响较小。At present, the optimization method has the poor energy saving effect and the large impact on the actual measured rate and success ratio of data in single - hop network. Therefore, a method to optimize energy consumption of actual measured data in low - power single - hop network based on optimal stopping rule was proposed. Based on the single - hop network structure, we determined the attenuation coefficient of single - hop network signal during measured data. Through the research on main part of measured data in single - hop network, we optimized the energy consumption model of actual measured data and determined the energy consumption of node communication unit. Meanwhile, we introduced signal attenuation coefficient to determine the total energy consumption of actual measured data in single - hop network. Based on the optimal stopping rule, we deduced the optimal stopping rule and the optimal energy consumption efficiency of sending terminal in single - hop network. Finally, we built the model of the minimum energy consumption of actual measured data in single - hop network and introduced the total energy con- sumption of actual measured data into the model. Thus, we achieved the energy consumption optimization of actual measured data in low power consumption single - hop network. Simulation results show that the proposed method reduces the energy consumption of actual measured data. Meanwhile, it has less effect on the actual measured speed and transfer success rate of data.

关 键 词：低功耗 单跳网络 实测数据 能耗优化 

分 类 号：TP393[自动化与计算机技术—计算机应用技术]