汽轮发电机组轴系支撑系统连接刚度不足引起的轴承座振动分析  

Analysis of Vibration Problems Caused by Insufficient Joint Stiffness of Bearing Block of Steam Turbine Generator Set

作　　者：俎海东 朱生华[1] 李晓波[1] 焦晓峰[1] ZU Haidong;ZHU Shenghua;LI Xiaobo;JIAO Xiaofeng(Inner Mongolia Power Research Institute,Hohhot 010020,China)

机构地区：[1]内蒙古电力科学研究院,呼和浩特010020

出　　处：《内蒙古电力技术》2018年第5期23-26,共4页Inner Mongolia Electric Power

基　　金：内蒙古电力科学研究院2016年自筹科技计划项目(2016-ZC-10)

摘　　要：以某汽轮发电机组为例,对轴承座振动大的原因进行分析。根据外部振动特性试验结果及轴振波德图,判断其原因为轴承座基础与台板、台板与轴承底座之间存在接触不良、连接刚度不足的问题。重新加装垫铁、增加垫铁数量,重新研刮台板、更换垫片后,轴承座振动达到合格水平。Taking a steam turbine generator set as an example, analyze the reasons forthe large vibration of the bearing block. According to the test results of external vibrationcharacteristics and the wave diagram of shaft vibration, it was judged that the reasons werethe bad contact between the bearing block foundation and the platform, the platform andthe bearing base, and the insufficient connection stiffness. The vibration of the bearing seatreached the qualified level after reinstalling the pad iron, increasing the number of padiron, relapping the table plate and replacing the pad.

关 键 词：汽轮机 轴系支撑系统 连接刚度 轴承座 振动 

分 类 号：TK268.1[动力工程及工程热物理—动力机械及工程]