L245M碳钢在含CO_2油田采出水中的腐蚀速率影响因素分析  

Analysis on the Influencing Factors of Corrosion Rate of L245M Steel in CO_2-containing Water Produced From Oil Fields

作　　者：李亚军[1] 李先明[1] 宋文文[1] 熊新民[1] 姚炳臣 LI Ya-jun;LI Xian-ming;SONG Wen-wen;XIONG Xin-min;GE Jian(PetroChina Tarim Oilfield Company,Xinjiang Korla 841000,China;School of Oil and Gas Engineering,Southwest Petroleum University,Sichuan Chengdu 610500,China)

机构地区：[1]中国石油塔里木油田分公司,新疆库尔勒841000 [2]西南石油大学石油与天然气工程学院,四川成都610500

出　　处：《当代化工》2018年第10期2011-2014,2018,共5页Contemporary Chemical Industry

基　　金：国家自然科学基金;项目号:51674213

摘　　要：L245M是常用的油气集输管线使用管材,在流动的含CO_2、Cl^-的油田采出水中容易发生严重腐蚀。采用高温高压反应釜、环境扫描电子显微镜和挂片失重实验法,测试了CO_2分压为0.02～1 MPa,Cl^-浓度为52 000～104 400 mg/L,温度为25～55℃,流速为0.1～0.75 m/s条件下的L245M碳钢的腐蚀速率和腐蚀产物形貌,分析了各因素对腐蚀速率的影响。在上述工况条件下,L245M碳钢腐蚀速率范围为0.72～3.44 mm/a。L245 M is a common material for oil transportation pipelines. It is prone to serious corrosion in flow CO2-containing and Cl--containing water produced from oil fields. In order to understand the corrosion tendency of L245 M in such water, the high temperature and high pressure reaction kettle, the scanning electron microscope and the coupon weight loss method were adopted to measure the corrosion rate and the corrosion product morphology under the conditions of CO2 partial pressures from 0.02 MPa to 1 MPa, Cl-concentrations from 52 000 mg/L to 104 400 mg/L, temperatures from 25 ℃ to 55 ℃, and flow velocities from 0.1 m/s to 0.75 m/s. The effect of various factors on the corrosion rate was analyzed. The results showed that the corrosion rate of L245 M steel was from 0.72 mm/a to 3.44 mm/a under above conditions.

关 键 词：L245M碳钢 CO2腐蚀 油田采出水 实验 影响因素 

分 类 号：TE988.2[石油与天然气工程—石油机械设备]