基于ZYNQ组件化开发环境的设计与实现  

Design and Implementation of Componentize Development Environment Based on ZYNQ

作　　者：赵智杰 高博[1] 刘拥军[1] ZHAO Zhijie;GAO Bo;LIU Yongjun(School of Information Systems Engineering,Information Engineering University,Zhengzhou 450000,China)

机构地区：[1]信息工程大学信息系统工程学院,河南郑州450000

出　　处：《电子科技》2018年第12期68-71,共4页Electronic Science and Technology

基　　金：国家科技支撑项目(2013BAH56F00)

摘　　要：针对异构信号处理平台中FPGA波形组件可移植性差和开发效率低的问题,文中借鉴软件通信体系架构中硬件抽象层规范,设计了一种基于ZYNQ的组件化开发环境。利用标准的运行环境屏蔽FPGA波形组件和具体硬件平台的差异,实现了FPGA波形组件动态配置。测试结果表明,通过标准化的运行环境,FPGA波形组件具有良好的可移植性和可重用性,提高了波形应用的开发效率。Aiming at the problem of poor portability and low development efficiency of FPGA waveform compo- nents in heterogeneous signal processing platform, a component development environment based on ZYNQ was de- signed by reterring to the hardware abstraction layer specification in software communication architecture. The differ- ences between FPGA waveform components and specific hardware platfomls were masked by the standard operating environment, which made FPGA waveform components achieve dynamic configuration. Test results showed that, through a standardized operating environment, FPGA waveform components had good portability and reusability, which improved the development efficiency of waveform applications.

关 键 词：ZYNQ 硬件抽象层 软件无线电 组件 异构信号处理平台 可移植 

分 类 号：TN104[电子电信—物理电子学]