基于DEFORM的皮尔格热轧复合钢管有限元模拟及分析  

Finite Element Simulation and Analysis of Pilger Hot Rolled Composite Steel Tube Based on DEFORM

作　　者：何宗霖[1] He Zonglin(Mechanical Engineering Department,Shanxi Engineering Vocational College,TaiyuanShanxi 03000)

机构地区：[1]山西工程职业技术学院机械工程系,山西太原030009

出　　处：《山西冶金》2018年第4期1-3,共3页Shanxi Metallurgy

基　　金：山西省留学基金资助项目(2017-084);山西省重点学科建设经费资助;国家自然科学基金面上资助项目(U1710113);中国博士后科学基金面上资助项目(2017M622903);山西省重点研发计划一般项目(201703D121008)

摘　　要：根据皮尔格轧机的轧制原理及特点,利用DEFORM-3D软件建立了皮尔格热轧45号钢与316不锈钢复合钢管轧制的有限元模型。完整的模拟了从复合管坯到成品复合管的热轧过程。根据仿真结果,分析了皮尔格热轧复合管坯的过程中,各阶段双层金属壁厚的演变规律、头尾部质量原因、各阶段双层金属管金属流动变化规律、及内外管等效应力分布规律,为实际生产和理论研究提供了指导依据。According to the rolling principle and characteristics of pi lger rolling mill, the finite element model of pilger hot-rolled 45 steel and 316 stainless composite steel tube was established by using DEFORM-3D software. The complete simulation of the hot rolling process from the composite pipe to the finished composite pipe is conducted.According to the simulation results, in the process of pilger hot rolling pipe billet, this paper analyzes the evolutionlaw of double layer metal wall thickness in every stage, the quality of the head and tail, the change rule of metal flow in double layer metal tubes at different stages, and the distribution law of the equivalent stress of the inner and outertubes, providing guidance basis for practical production and theoretical research.

关 键 词：皮尔格热轧 复合管 有限元模拟 

分 类 号：TG335.71[金属学及工艺—金属压力加工]