高精度电荷域ADC共模电荷误差前台校准电路  

High precision common mode charge error fore-ground calibration circuit for the charge-domain ADC

作　　者：陈珍海[1,2] 魏敬和[2] 于宗光[2,3] 苏小波[2,3] 薛颜[2] 张鸿[4] CHEN Zhenhai;WEI Jinghe;YU Zongguang;SU Xiaobo;XUE Yan;ZHANG Hong(School of Information Enginccring,Huangshan Univ.,Huangshan 245041,China;No.58 Rcscarch Institute,China Electronic Technology Group Corporation,Wuxi 214035,China;School of Microclcctronics,Xidian Univ.,Xi＇an 710071,China;School of Microclectronic,Xi＇an jiaotong Univ.,Xi＇an 710049,China)

机构地区：[1]黄山学院信息工程学院,安徽黄山245041 [2]中国电子科技集团第五十八研究所,江苏无锡214035 [3]西安电子科技大学微电子学院,陕西西安710071 [4]西安交通大学微电子学院,陕西西安710049

出　　处：《西安电子科技大学学报》2018年第6期137-143,149,共8页Journal of Xidian University

基　　金：国家自然科学基金资助项目(61704161);安徽高校自然科学研究重点资助项目(KJ2017A396)

摘　　要：提出了一种数模混合型高精度共模电荷误差校准电路,可对电荷域流水线模数转换器中由增强型电荷传输电路电荷传输关断电压随工艺、电压和温度波动、输入共模电荷变化、各流水线子级中电容非线性而引起的各类共模电荷误差进行精确补偿.所提出的高精度共模电荷误差校准电路被运用于一款14bit210MS/s电荷域模数转换器中,并在1P6M0.18μm CMOS工艺下实现.测试结果显示,该14bit模数转换器电路在210MS/s条件下对于30.1MHz单音正弦输入信号得到的无杂散动态范围为85.4dBc,信噪比为71.5dBFS,而模数转换器内核功耗仅为205mW,面积为3.2mm^2.A mix -signal high precision common mode charge error calibration circuit is proposed. The calibration circuit can be used to compensate the common mode charge errors caused by the deviation of the charge transfer cutoff voltage of boosted charge transfer introduced by PVT variation, the variation of input common mode charge and the capacitor mismatch in the pipelined sub stage circuit in the charge domain pipelined ADCs. Based on the proposed calibration circuit, a 14 bit 210MS/s charge domain pipelined ADC is designed and realized in a 1P6M 0.18 μm CMOS process. Test results show that the 14 bit 210MS/s ADC achieves the signal to noise ratio of 71.5dBFS and the spurious free dynamic range of 85.4dB, with 30.1 MHz input single tone signal at 210 MS/s, while the ADC core consumes the power of 205mW and occupies an area of 3.2 mm 2 .

关 键 词：流水线模数转换器 电荷域 前台校准 低功耗 共模电荷 

分 类 号：TN432[电子电信—微电子学与固体电子学]