检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李宁[1] 张利民[1] 邢辉[1] 张蓉[1] 殷鹏飞 吴耀燕 王娟 刘海楠 LI Ning;ZHANG Limin;XING Hui;ZHANG Rong;YIN Pengfei;WU Yaoyan;WANG Juan;LIU Hainan(Key Laboratory of Space Applied Physics and Chemistry,Ministry of Education,School of Science,Northwestern Polytechnical University,Xi'an 710072;College of Science,Sichuan Agricultural University,Ya'an 625014)
机构地区:[1]西北工业大学理学院空间应用物理与化学教育部重点实验室,西安710072 [2]四川农业大学理学院,雅安625014
出 处:《材料导报》2018年第22期3919-3924,3935,共7页Materials Reports
基 金:国家自然科学基金(51704242;51701160)
摘 要:研究了低压交流电脉冲下Al-7%Si合金初生α-Al相的微观组织演化规律,数值模拟了合金熔体中的电流及电磁力分布,结合模型中嵌入金属网的方法,对电脉冲调控微观组织的机理进行了分析。结果表明,无论砂型还是金属网内、外,α-Al树枝晶随着脉冲电流密度的增大而更细化,然而部分组织形貌由树枝状向蔷薇状的转变与脉冲电流密度和位置都有关。相同的电脉冲下,当脉冲电流密度足够大时,砂型中与金属网内、外的α-Al相组织形貌存在显著差异。分析认为,初生α-Al相组织的变化主要是由脉冲电磁力驱动的熔体对流作用引起的;此外通过计算熔体流动状态雷诺数,预测了不同密度电脉冲作用下Al-7%Si合金中初生α-Al相的形貌。The α-Al dendrite morphology evolution law of hypoeutectic Al-7% Si alloy under low voltage alternating current pulse (LACP) has been investigated in this paper. The distribution of current pulse and electromagnetic force in the alloy melt were numerically simulated. LACP of different current density was imposed in whole solidification process of the alloy and the wire metal tube was embedded in sand mould to restrain the melt convection. The mechanism of microstructure regulated by LACP was analyzed. The results show that the degree of refining of α-Al dendrite was aggravated with the increase of current pulse density in cas- ting samples of without wire metal tube and outside of wire metal tube and inside of wire metal tube. However, some of α-Al dendrites turn into rosiness from dendritic is related to the current density of LACP and location. There were significant differences in the morphology of the α-Al dendrite between casting samples of without wire metal tube and outside of wire metal tube and inside of wire metal tube. The analysis suggests that the change of α-Al dendrite was caused by melt convection resulted from the pulse electromagnetic force. The α-Al morphology can be predicted through calculating the Reynolds number of alloy melt, after Al-7% Si alloy was treated with different current density LACP.
分 类 号:TG113.12[金属学及工艺—物理冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117