检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:徐小评[1] XU Xiao-ping(Jiangsu Lianfa Textile Co.,Ltd.,Jiangsu Key Laboratory of Science & Technology of Eco Dyeing and Finishing,Nantong 226600,China)
机构地区:[1]江苏联发纺织股份有限公司江苏省生态染整技术重点实验室,江苏南通226600
出 处:《印染》2018年第22期33-35,共3页China Dyeing and Finishing
摘 要:讨论了棉氨纶弹力色织布免烫面料整理工艺中的高温定形温度、树脂用量及工艺流程,比较了其对弹性、强力、缩水率、平整度、颜色变化等的影响,确定了合理的后整理工艺。经整理的面料,按ASTM D3107-2011测试定伸长下的残余伸长率(30 min)≤8%,弹性回复率(30 min)≥50%。按AATCC 135-2014(1)ⅢA(i)检测,经纬向缩水为-4%~0;按ASTM D1424—2013测试撕破强力≥0.77 kg(1.7 lb);按ASTM D 5034—2013测试拉伸强力≥13.61 kg(30lb);按AATCC 124—2011测试平整度为5次水洗熨烫前≥2.8级;JIS L1041—2011测试甲醛含量≤75mg/kg,达到面料服用性能要求,同时符合客户对面料的要求。Non-ironing finish of cotton/polyurethane dyed fabric is introduced. The effects of setting tem- perature, resin concentration and technological process on elasticity, strength, shrinkage rate, flatness and color change of treated cotton/polyurethane dyed fabric are studied. According to ASTM D 3107-2011, the residual elongation rate (30 min) at constant elongation of treated fabric is no more than 8%, and elastic recovery rate (30 rain) is no less than 50%. According to AATCC 135--2014(1)111A(i), shrinkage rate of treated fabric is -4%-0. According to ASTM D1424-2013, the tearing strength of treated fabric is no less than 0.77 kg (1.7Ib). According to ASTM D 5034-2013, the tensile strength of treated fabric is no less than 13.61 kg (30 Ib). According to AATCC 124-2011, the flatness of treated fabric is no less than Grade 2.8. According to JIS L1041-2011, the formaldehyde content of treated fabric is no more than 75 mg/kg. The treated fabric can meet the requirements of wear performance, and can meet the re- quirements of customers for fabric.
分 类 号:TS195.55[轻工技术与工程—纺织化学与染整工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222