液力自动变速器换挡过程的反演优化控制  

Optimizing gear shifting quality with backstepping control for automatic transmission

作　　者：赵鑫鑫[1] 杨珏[1] 张静[1] 张文明[1] 

机构地区：[1]北京科技大学机械工程学院,北京100083

出　　处：《农业工程学报》2016年第S1期27-33,共7页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家高技术研究发展计划项目(2011AA060404)

摘　　要：为了将换挡品质优化问题转化为单一目标轨迹跟踪问题,运用Back-stepping控制进行液力自动变速器换挡过程控制的优化,该文通过分析换挡过程中各阶段变速器分离离合器与结合离合器运动状态,建立了离合器输出扭矩数学模型,利用变速器输入、输出转速变化,观测结合离合器转速情况,设定目标轨迹。结合输入状态稳定理论(ISS,input-to-state stable)设计了滑摩控制器,改变离合器控制电磁阀结合电流,实现了结合离合器转速对目标转速轨迹的跟踪。联合仿真结果表明,滑摩控制器输出结果对目标轨迹跟踪紧密,有效提高了液力机械自动变速器换挡品质。The Automatic Transmission is widely equipped in the heavy-duty trucks, while the driving comfort reduction during gear shift is the major drawbacks, and the optimization of gear shifting process is quite challenging due to the various objectives. With the development of modern control theory, it has been widely applied into gear shifting duration, such as PID control, genetic algorithm and dynamic programming et al. In this paper, a backstepping control strategy is proposed to enhance the gear shift quality, which will transform the multi-objective optimization to a single target tracking as well. According to the gear shifting dynamic model, gear shifting can be divided into four phases, lower gear phase, torque phase, inertial phase and higher gear phase. The clutch output torques during engagement and disengagement are derived considering the motion states of the off-going and on-coming clutches. The trajectory target is defined on the basis of the rotatory input and output speed of the transmission. Since the torque is hard to be measured accurately and the transmission output speed does not has obvious change during the torque phase of gear shifting, we will adjust the current of pressure reducing valves in the inertial phase. By analyzing the motion states of off-going clutch and on-coming clutch, the mathematical model of output torque for clutches has been built in this paper. The backstepping method and state stability theory (ISS) are utilized in the sliding mode controller to control the synchronization torques by tuning the valves current. The shifting quality is assessed in terms of the shift time, jerk and sliding friction work which are considered into the objective function in sliding control problem. All of them are fitted as three-order polynomial functions, and the controller parameters are evaluated according to the system parameters and the margin of errors. Based on the reference trajectory, the speed of driven plate on-coming clutch decreases as a third order polynomial during inertial pha

关 键 词：车辆 变速器 优化 换挡品质 Back-stepping控制 轨迹跟踪 

分 类 号：U463.212[机械工程—车辆工程]