检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:姜利祥[1] 刘振琦[1] 何世禹[1] 白羽[1] 陈平[2] 盛磊[2]
机构地区:[1]哈尔滨工业大学空间材料与环境工程实验室,150006 [2]中国空间技术研究院508所,100076
出 处:《应用激光》2002年第4期409-412,共4页Applied Laser
摘 要:利用射流式真空紫外辐照模拟设备(BYΦ)模拟实际空间辐照条件,研究真空紫外辐照下CF/EP的损伤效应。质量损失、层间剪切强度、SEM和XRD结果表明:真空紫外辐照下CF/EP产生明显的质量损失,表面受到严重破坏;辐照初期层间剪切强度略有上升,随着辐照时间的延长层间剪切强度呈明显下降趋势;真空紫外辐照下碳纤维无明显变化,并且对树脂基体起到一定的保护作用。Damage effects of CF/EP under the vacuum ultraviolet radiation were studied using a gas-jet type of vacuum ultraviolet simulator (BYO)for simulating the ultraviolet radiation in real space. Results of mass loss, inter - layer shear strength, SEM and XRD shown that obvious mass loss of CF/EP was produced and the surface was suffered a severe damage under vacuum ultraviolet. The inter- layer shear strength slightly increased at the original period of radiation and presents a remarkable decreasing trend as increasing the radiation time. The carbon fibers have no obvious changes and serve as a protector for epoxy matrix under the vacuum ultraviolet radiation.
关 键 词:损伤效应 真空紫外辐照 碳/环氧复合材料 质量损失 层间剪切强度 航空航天材料
分 类 号:V258[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.118