乙醇萃取酸性氧化石墨烯的研究  

Study on Extracting Acid Graphene Oxide from Ethanol

作　　者：陈斯[1] 曾效舒[1] 王艳春[1] 

机构地区：[1]南昌大学机电工程学院,南昌330031

出　　处：《人工晶体学报》2016年第1期267-272,共6页Journal of Synthetic Crystals

基　　金：江西省科技厅攻关资助项目(z02727);南昌大学分析测试中心测试基金项目资助(201203)

摘　　要：以改进的氧化还原法(Hummers法)制备的氧化石墨烯为原料,采用乙醇萃取法过滤酸性氧化石墨烯溶液使其恢复至中性。对比分析了与以往采用水剂法进行清洗的效果,并且进一步考察了乙醇浓度以及温度对萃取过程的影响。采用Zeta电位、场发射扫描电镜、X射线衍射仪以及pH值检测和重溶情况对萃取效果进行了表征和判断。试验结果表明:乙醇萃取法可以大大缩短酸性氧化石墨烯溶液恢复至中性的时间并且不改变其本身性能;当氧化石墨烯溶液浓度为1 mg·mL^(-1)和0.5 mg·mL^(-1)时,分别加入浓度为40%v/v和95%v/v乙醇,温度为60℃是最佳的萃取选择。Using modified Hummers to prepare graphene oxide(GO) and adopting ethanol extraction method to filtrate the acid GO solution to make it neutral.The efficiency of new processing was compared with the before way of aqueous extraction and the influence of ethanol concentration and temperature on the extraction process was investigated.Efficiency of the ethanol extraction method was demonstrated via Zeta potential,SEM,XRD,pH and the re-dissolved phenomenon.The results show that ethanol extraction method can shorten the time to recover acid GO to be neutral and can not change its properties.As the concentration of GO solution are 1 mg ? mL^(-1) and 0.5 mg ? mL^(-1),adding with 40%v/v and 95%v/v of ethanol respectively at the temperature of 60 ℃ are the best choice for extraction.

关 键 词：氧化石墨烯 乙醇 萃取 过滤 

分 类 号：O613.71[理学—无机化学]