等离子体引发原位聚合制备凹凸棒土/聚苯乙烯纳米复合物  

Study on the Preparation of Attapulgite/PS Nanocomposites via In-situ Polymerization

作　　者：杨利营[1] 盛京[1] 王雪梅[1] 宋仁峰[1] 沈宁祥[1] 

机构地区：[1]天津大学材料科学与工程学院,天津300072

出　　处：《功能高分子学报》2002年第3期245-250,共6页Journal of Functional Polymers

基　　金：国家自然科学基金资助项目(20074024)

摘　　要：　用阳离子表面活性剂处理凹凸棒土(Attapulgite),通过超声分散的方法将其均匀分散到苯乙烯单体中,并采用等离子体引发的方法制备出凹凸棒土/聚苯乙烯纳米复合物。通过透射电子显微镜(TEM)和X 射线衍射(XRD)观察了凹凸棒土及其纳米复合物的微观结构。对复合物的GPC测试表明,采用等离子体引发聚合反应可以显著提高树脂的分子量。XRD结果表明聚苯乙烯不是嵌入到凹凸棒土的层间,而是通过离子吸附接枝在凹凸棒土的棒状晶束上。The composite of attapulgite and polystyrene was prepared via plasmainduced insitu polymerization. The attapulgite particles were firstly modified by cationic surfactants, then treated by ultrasound. The effect of reactive temperature and input power on monomer conversion and molecular weight were also discussed. This method was compared with insitu thermal polymerization. The morphology, structure of ultrasound treated attapulgite were characterized by means of TEM, XRD,and FTIR, and the corresponding nanocomposites were investigated by TEM, FTIR, XRD,and GPC. It was found that the attapulgite crystal needles are well dispersed after treatment with ultrasound. Adding of cationic surfactants could minimize the agglomeration of the particles. Contrasting experiments revealed that plasmainduced polymerization can raise the molecular weight of the composite, avoiding the formation of verylow molecular weight polymer as reported in reference. XRD results show that PS is not intercalated into attapulgite, but grafted on the crystal needles through ion bonding.

关 键 词：等离子体引发原位聚合 制备 凹凸棒土 聚苯乙烯 纳米复合物 结构 

分 类 号：TB332[一般工业技术—材料科学与工程] TB383