基于ADAMS和AMESim联合仿真的调绳器动态特性分析  

Analysis of Dynamic Characteristic of Rope Adjusting Device Based on ADAMS and AMESim Co-simulation

作　　者：李军霞[1,2] 何月华 

机构地区：[1]太原理工大学机械工程学院,太原030024 [2]山西省矿山流体控制工程技术研究中心,太原030024 [3]徐工集团工程机械股份有限公司建设机械分公司,江苏徐州221004

出　　处：《太原理工大学学报》2016年第3期304-308,共5页Journal of Taiyuan University of Technology

基　　金：教育部新世纪优秀人才支持计划基金资助项目(NCET-12-1038);山西省科技攻关基金资助项目:带式输送机断带抓捕装置设计与研究(2015031006-2)

摘　　要：为全面分析调绳器的机-液耦合复杂系统,提出了基于数字化虚拟样机的评估方法。通过ADAMS与AMESim软件接口,关联调绳器液压系统模型与机械模型,建立调绳器的机-液耦合仿真模型和实验样机,分析了调绳器的动态特性。结果表明,锁绳装置可以快速锁紧钢丝绳;在锁绳状态下,通过预紧力油缸反向作用力,可以顺利打开锁绳装置。耦合仿真模型和试验样机可用于调绳设备方案设计、性能评估,也可用于系统优化研究。In order to analyze complex hydraulic-mechanical coupling system of rope adjusting device,the evaluation on digital virtual prototype was proposed.Hydraulic-mechanical simulation model was established by integrating the hydraulic system model and mechanical model of rope adjusting device,via software interfaces between ADAMS and AMESim,and the dynamic characteristics of the device were analyzed.The co-simulation model can be used to design the system,evaluate the performance and optimize the system to develop rope adjusting device.It provides a short development cycle and low-cost method to develop production.

关 键 词：调绳器 机液耦合 动态特性 

分 类 号：TD53[矿业工程—矿山机电]