新一代炼钢-连铸-热轧区段配置  

New Generation of Steelmaking-Continuous Casting-Rolling Section Configuration

作　　者：彭其春[1] 田乃媛[1] 萧忠敏[2] 王德城[2] 

机构地区：[1]北京科技大学 [2]武汉钢铁(集团)公司

出　　处：《炼钢》2002年第5期31-34,共4页Steelmaking

摘　　要：分析了炼钢 -连铸 -热轧区段的匹配模式 ,指出钢铁制造流程中转炉 -连铸机 -热轧机的合理数量配置是“1 1 1” ;在热轧的生产规模为 3 5 0～ 5 0 0万t/a内 ,与之相对应的转炉配置和容量为 :大型转炉 ,采用三吹二模式 ,其容量范围为 15 0～ 2 15t;对于高效转炉采用一座转炉吹炼制 ,其容量为195～ 2 80t;并基于转炉 -连铸机 -热轧机的“1 1 1”Analysis on the matching mode of steelmaking continuous casting rolling section indicates that the reasonable configuration for the section is '1 1 1' of BOF caster rolling mill.For a hot rolling mill with an annual capacity of 3.5 ～ 5.0 million tone the proper configuration of the section is installation of three large converters (blowing pattern 3by2) and their working capacity be confined within the limit of 150～215 t/heat.For the high efficiency BOF the more reasonable blowing pattern is one BOF blowing and its working capacity is within the range of 195～280 t/heat.The plane layout for the steel plant and the hot roling mill is based primarily on '1 1 1' concept of converter continuous caster hot rolling mill.

关 键 词：炼钢 连铸 热轧 钢铁制造流程 转炉容量 配置 

分 类 号：TF01[冶金工程—冶金物理化学]