检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王录才[1] 王芳[1] 游晓红[1] 任建富[1]
出 处:《太原重型机械学院学报》2002年第3期251-254,259,共5页Journal of Taiyuan Heavy Machinery Institute
基 金:太原市启明星项目 (9814 0 1)
摘 要:泡沫金属是一种新型的多孔功能材料 ,其特殊的结构及性能特征将使其在高科技领域及一般工业领域受到越来越广泛的应用。本文介绍了真空渗流法泡沫铝制备工艺 ,在原有制备小型件的基础上 ,设计制造了可以一体化加热的板材制作模具 ,并通过改进设备和工艺参数 ,获得了大规格的泡沫铝板材。在实验室条件下 ,当工艺参数为浇注温度 72 0℃ 76 0℃ ,模具和填料预热温度 4 5 0℃ 5 0 0℃ ,真空度 - 0 .0 4MPa - 0 .0 6MPa时 ,得到板材尺寸为 30 0mm× 30 0mm× (2 0 75 )mm ,孔径 0 .6 3mm 3.2mm ,孔隙率 5 0 % 75 % ,为泡沫铝的进一步开发和应用奠定了基础。Metallic foams is a new structural and functional material. It will be widely applied to the high and general technique field because of its particular structure and characteristics. The infiltration casting principle is introduced in this paper. Based on the production of small Aluminum foam samples, the mould with heating component for preparing greater board was designed and manufactured. The aluminum boards of 300mm×300mm×(20 75)mm were fabricated by improving equipment and process parameters.The optimum process parameters under the condition of experiment were as follows:the pouring temperature of the molten Al alloy:720℃ 760℃,the preheated temperature of the mould and the filling particle:450℃ 500℃and the vacuum pressure:-0.04 MPa -0.06MPa.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229