检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国科学院武汉岩土力学研究所,武汉430071 [2]中国科学院武汉物理与数学研究所,武汉430071
出 处:《力学学报》2002年第5期812-819,共8页Chinese Journal of Theoretical and Applied Mechanics
基 金:国家自然科学基金(59879027资助项目.
摘 要:从理论上对由系统锚杆加固的正交各向异性岩体,取出包含锚杆的表征单元.根据“等效材料”的概念,在原岩体的本构关系和破坏准则中计人锚杆刚度和强度的“贡献”,从而建立了相应锚固岩体的木构关系和破坏准则.然后列举算例,考察了表征单元的应力-应变关系和破坏强度随锚杆安置角度变化的各向异性表现.最后将计算与一个简单试验的结果作了对比,看到二者的吻合程度较好,因而初步地验证了所提力学模型的可靠性.According to the concept of equivalent material-the material that exhibits naturesof uniformity and singleness in macro sense , the constitutive relationship of the material is the same as that of the material that exhibits meso-nonuniformity and contains various compositions. Some researchers have performed many studies on the mechanical properties of the rockmass anchored with systematic bolts such as deformability and strength through model simulation and obtained both theoretical and empirical relation equations between the mechanical indexes and the bolt parameters (diameter, length, spacing for example) of the bolted rockmass. Unfortunately, theirstudies neglect an important nature of the bolting support-quite strong directivity becausethe bolted rockmass under their consideration are almost treated as an isotropic body. In fact, no rockmass, if bolted, will exhibit isotropic changes in its mechanical properties and the most obvious improvement of the properties due to bolting takes place along the bolt axial direction whereas the least takes place in the direction perpendicular to the bolt. Accordingly, the bolted rockmass is a kind of anisotropic body in more strict physical sense, whose characters should be studied thoroughly.Out of this consideration mentioned about, the authors have made attempts to proceed from establishing the theoretical model for the bolted rockmass then to analyze numerically the mechanical behavior of the rockmass. In doing so, firstly consider an orthotropic country rockmass and cut off a representative element containing a bolt in the light of the concept of equivalent material from the mass which has been anchored with systematic bolts, and then deduce and establish the constitutive relationship and the failure criterion of the bolted rockmass by the method in whichthe contributions of the bolt to both stiffness and strength of the country rockmass have been fully taken into account, and afterwards perform numerical computations to analyze the anisotripic behavior of both bolt
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15