TCS法生产异形细旦阳离子染料可染涤纶  

TCS process for profiled fine denier cationic-dyeable PET FDY

作　　者：王延伟[1] 刑天来[1] 洪亮[1] 

机构地区：[1]河南纺织高等专科学校,河南郑州450007

出　　处：《合成纤维工业》2002年第5期59-61,共3页China Synthetic Fiber Industry

摘　　要：用 TCS法生产异形细旦阳离子涤纶 FDY,探讨切片含水率、纺丝温度、冷却成形、上油率、热管温度等工艺参数对产品质量的影响。结果表明 ,采用合适的干燥工艺可获得含水率小于 2 0μg/g、粘度降小于 0 .0 0 5 d L/g的干切片 ,纺丝系统采用两套联苯加热保温 ,纺丝温度 2 99～ 30 1℃ ,降低侧吹风速度 ,提高侧吹风温度 ,上油率控制在 1%～ 1.4% ,热管温度为 172～ 174℃ ,卷绕速度为 4.5～ 4.6km /m in。Rational choice of the process parameters, such as water content of chips, spinning temperature, quenching conditions, oil pick-up and thermal-channel temperature, was decided for profiled fine denier cationic-dyeable PET FDY production by TCS process. The results showed that the proper drying process ensured the water content of dried chips less than 20 μg/g, viscosity degradation less than 0.005 dL/g. The spinning plant was installed with two sets of dowtherm. The spinning temperature should be in the range of 299～301℃. The high-quality profiled fine denier cationic-dyeable PET FDY can be obtained at lower quenching speed and higher temperature, oil up-take in the range of 1%～1.4%, the thermal channel temperature in the range of 172～174℃ and the winding speed in the range of 4.5～ 4.6 km/min.

关 键 词：TCS法 异形细旦丝 阳离子染料可染 热管纺丝 涤纶长丝 

分 类 号：TS193[轻工技术与工程—纺织化学与染整工程]