检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:熊钰[1] 孙良田[1] 孙雷[1] 潘晓霞[2] 赵明[3]
机构地区:[1]西南石油学院,四川南充637001 [2]江苏油田分公司研究院 [3]大港油田公司勘探开发技术研究中心
出 处:《西南石油学院学报》2002年第5期34-36,共3页Journal of Southwest Petroleum Institute
基 金:"油气藏地质及开发工程"国家重点实验室开放基金项目 (PLN0 118)
摘 要:注气速度对非混相驱的采收率有很大的影响。在注气非混相驱的二维驱替理论模型的基础上 ,分析了注水开发后单一储层注N2 非混相驱界面稳定条件 ,给出了倾斜多层油藏注水开发后注气非混相驱考虑渗透率级差和有效吸气厚度影响的合理注N2 速度界限的确定和注气动态分析方法 ,并对某实际油藏剖面进行注氮动态分析 ,用数值模拟进行了对比分析验证。结果表明 :所给出的合理注气速度界限的确定方法和倾斜多层油藏的注N2Gas injection velocity has strong effected on oil recovery for non-miscible flooding. Based on theoretical model of two-dimensional displacement in porous media and interface stability condition of N 2 non-miscible flooding after waterflooding, the determination method of reasonable N 2 injection velocity limit and the performance analysis ways as to tilting multilayer reservoir have been presented in this paper by taking both permeability and effective gas imbibition thickness into account. It has been found that reasonable N 2 injection velocity is proportional to the product of permeability by effective gas imbibition thickness, and reasonable N 2 injection velocity must be less than minimum value of maximum N 2 injection velocity in all layers. Partial stability will occur when N 2 injection velocity is greater than minimum velocity and less than maximum velocity. Oil recovery will gradually decrease in such situation. Comparing results from N 2 injection performance analysis of actual reservoir with that of simulation indicated that methods presented in the paper are reasonable and effective ways for determining reasonable N 2 injection velocity and analyzing injection performance in tilting multilayer reservoir.
关 键 词:倾斜多层油藏 注氮气 非混相驱 注气速度 研究 稳定性 提高采收率
分 类 号:TE357.7[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249