通道幅相误差对数字阵列天线性能影响及校准  

Effect of channel amplitude/phase errors on digital array performance and calibration

作　　者：唐晓雷[1] 张令坤[1] 陈飞[1] TANG Xiaolei;ZHANG Lingkun;CHEN Fei(Nanjing Research Institute of Electronics Technology, Nanjing Jiangsu 210039,China)

机构地区：[1]南京电子技术研究所,江苏南京210039

出　　处：《太赫兹科学与电子信息学报》2016年第4期562-566,共5页Journal of Terahertz Science and Electronic Information Technology

摘　　要：为实现低副瓣数字阵列天线性能,需要对阵面通道幅相误差进行校准。针对此问题,定性分析了通道幅相误差、阵面通道数与数字阵列天线主要性能(副瓣电平、波束指向、增益)的相对关系,分析结果表明:通道间幅相误差越大,副瓣电平、波束指向、增益越差;通道数越多,副瓣电平、波束指向受通道误差影响越小,而增益受通道幅相误差的影响与阵面通道数无关。结合数字阵雷达实际使用中阵面通道幅相误差修调问题,重点研究了通道误差测量方法。给出了利用内监测法和中场测量法进行通道误差测量的原理、实现方法及适用条件,该2种通道误差测量方法可以作为互补手段使用。最后,给出了一种基于多次测量取平均值的数字阵列幅相误差校准方法,仿真结果表明:校准前后,通道幅相误差分别由2 d B和20°变为0.4 d B和2°,满足指标要求。The calibration of channel amplitude/phase errors is necessarily required in order toachieve the performance of low side-lobe digital array. The relationships among channel amplitude/phaseerrors, array channels and the main performance (side-lobe level, beam direction, gain) of digital array areanalyzed. Analysis results show that, the side-lobe, gain and beam direction would deteriorate as theamplitude/phase errors increase; the influence degree of amplitude/phase errors on the side-lobe level andbeam direction would decrease as the number of the array channels increase; the influence ofamplitude/phase errors on gain is independent on the number of the array channels. According to theadjustment problem of channel amplitude/phase errors in digital array application, as a complementarymethod of measuring the channel amplitude/phase errors, the principle, implementation methods andapplication conditions of internal-monitor and mid-field measurement are studied in detail. A calibrationmethod of channel amplitude/phase errors is put forward. Simulation results show that after calibration, thechannel amplitude/phase errors decrease from 2 dB and 20° to 0.4 dB and 2° respectively,which meetsthe expected specification.

关 键 词：数字阵列天线 幅相误差 内监测法 中场测量法 误差校准 

分 类 号：TN820[电子电信—信息与通信工程]