基于人工阻抗表面的毫米波圆极化全息天线  

Millimeter-wave circularly polarized holographic antenna based on artificial impedance surface

作　　者：李江[1] 杨春[1] 陈琦[1] 李波[1] 何晓阳[1] LI Jiang;YANG Chun;CHEN Qi;LI Bo;HE Xiaoyang(Institute of Electronic Engineering, China Academy of Engineering Physics,Mianyang Sichuan 621999,China)

机构地区：[1]中国工程物理研究院电子工程研究所,四川绵阳621999

出　　处：《太赫兹科学与电子信息学报》2016年第4期581-585,共5页Journal of Terahertz Science and Electronic Information Technology

基　　金：国家自然科学基金资助项目(61302047);中国工程物理研究院科学技术发展基金资助项目(2013B0403065)

摘　　要：基于全息光学原理,提出并设计了一种加载相位调制的毫米波圆极化全息天线,天线由电小尺寸的人工阻抗单元按表面阻抗分布参数排列而成。利用横向谐振技术分析了标量人工阻抗单元表面阻抗的计算方法,建立了单元尺寸与表面阻抗之间的数据库。给出了干涉表面的阻抗分布参数计算方法,通过加载相位调制,实现了全息天线的圆极化。利用Matlab-HFSS联合建模仿真,建立了毫米波圆极化全息天线的基本模型,仿真结果表明,天线工作于35 GHz,波束沿法向偏转35°,中心的轴比小于1.5 d B。A novel circularly polarized holographic antenna is proposed at 35 GHz based on opticalholographic principle. The antenna is composed by sources and an interference plane which is based onquasi-periodically artificial impedance surface. The surface impedance of scalar artificial impedancesurface is analyzed by transverse resonance technique. In order to achieve circular polarization, a phasemodulation is introduced into the function of the interference plane impedance. The antenna radiatescircularly polarized wave from linearly feed. As an example, a circularly polarized holographic antenna issimulated. The results indicate that the beam deflects 35° along z axis, and the axial ratio is below 1.5 dBat 35 GHz center frequency.

关 键 词：毫米波 全息天线 圆极化 相位调制 人工阻抗表面 

分 类 号：TN821.1[电子电信—信息与通信工程]