基于ADAMS的某转管武器缓冲装置的参数化设计  

Parameter Design of Certain Type Gatling Gun Buffer Device Based on ADAMS

作　　者：马超[1] 李强[1] 程驰青 Ma Chao;Li Qiang;Cheng Chiqing(School of Mechatronic Engineering, North University of China, Taiyuan 030051, China)

机构地区：[1]中北大学机电工程学院,太原030051

出　　处：《兵工自动化》2016年第11期32-36,共5页Ordnance Industry Automation

基　　金：国家基础科研项目资助(A0820132003)

摘　　要：针对速转管武器射速的增加引起后坐力增大的问题,设计一种基于ADAMS的某转管武器缓冲装置。以某小口径自动武器缓冲装置为研究对象,在Solidworks中建立三维模型,以ADAMS为分析平台,对缓冲装置的关键设计参数进行优化分析,得到最优的参数组合。仿真结果表明:采用参数化分析结果匹配设计的缓冲装置,能够满足后坐阻力和后坐位移的要求,对武器其他结构参数的优化设计有一定的参考价值。Aiming at the recoil force increasing caused by Gatling gun firing rate increasing, design certain type Gatlinggun buffer device based on ADAMS. Take certain type small caliber automatic weapon buffer device as the study target,establishes the three-dimensional model in Solidworks, take the ADAMS as the analysis platform, carry out optimalanalysis for important parameters of the buffer device, obtain optimal parameter combination. The simulation result showsthat the buffer device used parameters optimization can satisfy the demand of the recoil resistance and the translation. It hascertain value for reference to optimize design other parameters of the weapon mechanism.

关 键 词：转管武器 缓冲装置 ADAMS 参数优化 

分 类 号：TJ302[兵器科学与技术—火炮、自动武器与弹药工程]