铝/钛超声波金属焊接参数的工艺优化  

Process Optimization of Ultrasonic Metal Welding Parameters for Al/Ti Joints

作　　者：赵玉津 张慧敏[1] 罗震[1,2] 冯梦楠 解龑 Zhao Yujin;Zhang Huimin;Luo Zhen;Feng Mengnan;Xie Yan(School of Materials Science and Engineering,Tianjin University,Tianjin 300072,China;Collaborative Innovation Center of Advanced Ship and Deep-Sea Exploration,Shanghai 200240,China)

机构地区：[1]天津大学材料科学与工程学院,天津300072 [2]高新船舶与深海开发装备协同创新中心,上海200240

出　　处：《天津大学学报（自然科学与工程技术版）》2017年第5期540-544,共5页Journal of Tianjin University：Science and Technology

基　　金：国家自然科学基金资助项目(51405334;51275342)~~

摘　　要：通过设计交互正交试验,以接头的拉伸载荷和信噪比为评价指标,对铝/钛异种金属超声波焊接参数进行工艺优化.以焊接能量、振幅、压力为参数,设计成三因素、三水平的L27交互影响正交试验.并对试验结果进行极差和方差分析、F验证和试验验证.结果表明:焊接参数主次顺序为能量>振幅>压力,其对拉伸载荷的贡献率分别为86%、8%、4%,;获得最大拉伸载荷的工艺参数组合为能量950,J、振幅75,mm、压力0.552,MPa(A_3B_2C_2);获得最稳健拉伸载荷工艺参数组合为能量900,J、振幅70,mm、压力0.621,MPa(A_1B_1C_3).In this study,through designing orthogonal test and using the tensile load of joints and signal-to-noiseratio as the evaluation indices,the process of ultrasonic welding parameters for Al/Ti joints was optimized.Usingwelding energy,amplitude and pressure as welding parameters,an interaction effect L27orthogonal test with threefactors and three levels was designed.The experimental results were analyzed by analyses of range and variance,Ftest and test verification.The results show that the values of different welding parameters can be presented as energy>amplitude>pressure and their percentage contributions are86%,8%and4%respectively;the process parameterscombination of the largest tensile load is energy950,J,amplitude75,μm and pressure0.552,MPa(A3B2C2);theprocess parameters combination of the most robust tensile load is energy900,J,amplitude70,μm and pressure0.621,MPa(A1B1C3).

关 键 词：超声波焊接 交互正交试验 拉伸载荷 极差 信噪比 方差 

分 类 号：TG453.9[金属学及工艺—焊接]