基于ZigBee的煤场无线自燃检测系统硬件设计  

Hardware Design of Coal Mine Wireless Spontaneous Combustion Detection System Based on ZigBee

作　　者：张晶[1] 吕少胜[2] 卢智嘉[1] 于京生[1] ZHANG Jing;LV Shao-sheng;LU Zhi-jia;YU Jing-sheng(School of Mechanical & Electronic Engineering, Shijiazhuang University, Shijiazhuang, Hebei 050035, China;Hebei Electric Power Design & Research Institute, Shijiazhuang, Hebei 050031, China)

机构地区：[1]石家庄学院机电学院,河北石家庄050035 [2]河北省电力勘测设计研究院,河北石家庄050031

出　　处：《石家庄学院学报》2017年第3期33-38,共6页Journal of Shijiazhuang University

基　　金：河北省科技厅项目(15270349、15220353);河北省高等学校科学研究计划(ZC2016107、QN2016324)

摘　　要：通过比较传统的检测方式,采用ZigBee技术设计了煤场无线自燃检测系统.以CC2530为主控及通信芯片,设计了数据传输模块、传感器模块、天线模块等硬件电路,并分析了CC2530的组网流程.系统实现了对目标节点温度的采集、无线传输及显示,在试验条件下,系统的通信距离约为60 m.该系统功耗低,稳定性高,能够达到对煤场自燃隐患进行监测的目的.By comparing the traditional detection methods,the ZigBee technology is used to design the wirelessspontaneous combustion detection system.CC2530is used as the main control and communication chip,and thehardware circuits of data transmission module,sensor module,antenna module and so on are designed.Thenetworking process based on CC2530is analyzed.The functions of collecting,transmitting and displaying thetemperature of the target node are realized.Under the experimental conditions,the communication distance is about60m.The system has low power consumption and high stability,which can achieve the purpose of monitoring thehidden danger of coal spontaneous combustion.

关 键 词：ZIGBEE 无线自燃检测 CC2530 组网流程 

分 类 号：TN915[电子电信—通信与信息系统]