涂料铝粉工艺系统改进研究  

Research on Coating Aluminum Powder Process System Improvement

作　　者：石广福[1] 王雪玲[1] 曹新宇[1] 王丹[1] 张长坤[1] 孙兆威 SHI Guang-fu;WANG Xue-ling;CAO Xin-yu;WANG Dan;ZHANG Chang-kun;SUN Zhao-wei(Northeast Light Alloy Co.,Ltd., Harbin 150060, China)

机构地区：[1]东北轻合金有限责任公司,黑龙江哈尔滨150060

出　　处：《铝加工》2017年第4期39-41,共3页Aluminium Fabrication

摘　　要：对影响涂料铝粉粒度与亮度的分离器进风口变径和中心排料管直径进行了工艺改造,同时更换了两级集尘装置。工艺改造后,达到了在保证亮度的前提下,可以直接生产二号粉和附加值更高的涂料三号铝粉的目的,既减少了一号涂料铝粉积压损失,又开发了一个新型产品。Process improvement to influence the coating aluminum powder grain size and brightness of air intake reducing and center discharge tube diameter of separation machine had been conducted.Two levels of dust collection device had been replaced at the same time,the premise to guarantee the brightness can be achieved,can directly produce2#powder and higher value-added coating3#aluminum powder as well,and the purpose of both reducing the backlog of1#coating aluminum powder loss,and developing a new product are obtained.

关 键 词：涂料铝粉 粒度 附着率 改造 

分 类 号：TQ630.5[化学工程—精细化工]