新型絮凝-缓蚀双效高分子的合成及性能  

Synthesis and properties of a new type of flocculation and corrosion inhibition dual-effect polymer

作　　者：王博涛[1] 甄建斌[2] 郭睿[2] 李晓芳[2] 杨江月[2] 王超[2] WANG Botao;ZHEN Jianbin;GUO Rui;LI Xiaofang;YANG Jiangyue;WANG Chao(Department of Chemical Engineering ,Shaanxi Energy Institute,Xianyang712000,Shaanxi,China;Key Laboratory of Auxiliary Chemistry and Technology in Light Industry,Ministry of Education,Shaanxi University of Science and Technology,Xi’an 710021,Shaanxi,China)

机构地区：[1]陕西能源职业技术学院化学工程系,陕西咸阳712000 [2]陕西科技大学轻化工助剂化学与技术教育部重点实验室,陕西西安710021

出　　处：《化工进展》2017年第11期4216-4223,共8页Chemical Industry and Engineering Progress

基　　金：陕西省科技统筹创新工程计划项目(2014KTCL01-11)

摘　　要：以自制曼尼希碱(A)和对丙烯酰胺苯甲酸钠(B)为单体原料,以过硫酸钾和亚硫酸氢钠为复合引发剂,采用水溶液自由基聚合法制得聚合物(AB);利用响应面法优化合成工艺条件,确定其最佳工艺条件为n(曼尼希碱A)∶n(对丙烯酰胺苯甲酸钠B)为1.3∶1,聚合时间为6.5h及聚合温度为80℃。采用Tafel极化曲线、AFM、XPS对该聚合物的缓蚀性能进行了研究,同时考察了该聚合物对油田废水的除油效果。结果表明:在50℃,聚合物的投加量为0.9%时,A3钢在20%的盐酸溶液中缓蚀剂率达到98.9%,且该聚合物为抑制阳极为主的缓蚀剂;当聚合物加入量为50mg/L、温度60℃、p H=5时,除油率达到90.3%。With the potassium persulfate-sodium bisulfite as initiator,the copolymer(AB)was synthesized with sodium benzoate of p-acrylamide and Mannich base as monomers.The optimal synthesis conditions were determined as reaction between A and B with a molar ratio of1.3for6.5h at80℃using resource surface methodology.The inhibition performance of a novel copolymer(AB)for A3steel in20%HCl solution was investigated using polarization curves、AFM and XPS.The oil removal performances of copolymer(AB)were also investigated.The results showed that the inhibition rate was of98.9%,with dosage of corrosion inhibitor0.9%at50℃,which was a mixed corrosion inhibitor mainly by restraining the anodic process.The oil removal rate of copolymer(AB)was90.3%,under the conditions of50mg/L copolymer dosage,60℃and pH=5.

关 键 词：曼尼希碱 对丙烯酰胺苯甲酸钠 水溶液聚合法 缓蚀性能 除油 

分 类 号：TE685.32[石油与天然气工程—油气加工工程]