角联锁三维机织物在多综眼织机上的织造设计  

Weaving of Angle-interlock Fabric on Multi-eyelet Loom

作　　者：胡雨 裴鹏英 龚小舟 

机构地区：[1]武汉纺织大学纺织科学与工程学院

出　　处：《纺织导报》2017年第12期35-39,共5页China Textile Leader

基　　金：教育部留学回国人员科研启动基金(教外司留[2013]693号);湖北省自然科学基金面上项目(2015CFB553);国家自然科学青年基金项目(51502209)

摘　　要：针对三维机织物在厚度方向拓展受到限制的现状,提出两种关于把三维机织物织厚的设计方案。通过以层层正交角联锁织物为例,探究将厚度推广为N层的织物在多综眼织机上的织造方法,设计上机工艺(包括穿综图、纹板图及选纬图)。通过实际上机实验,成功使用两种方案织出层层正交角联锁织物。结果表明,两种设计方案都可用于织造不同厚度的角联锁三维机织物,同时两种方案都具备各自的织造特性。In order to increase the thickness of three-dimensional woven fabric,two design schemes were proposed.Experimental study was carried out on weaving thicker n-layer orthogonal angle-interlock fabric on multi-eyelet loom,then four types of looming draft(including cross-sectional image of warp-wise direction,drafting plan,pegging plan and weft insertion plan)were drawn up.Through practical experiments,orthogonal angle-interlock fabrics were successfully woven with the two schemes.The results show that both the two design schemes can be used for weaving fabrics of different thickness and they have their respective weaving characteristics.

关 键 词：三维机织物 正交角联锁 多综眼织机 

分 类 号：TS105.11[轻工技术与工程—纺织工程]