检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:倪振松 蔡曙日 刘京 NI Zhensong;CAIShuri;LIU Jin(Fuqing Branch of Fujian Normal University, Fuqing, Fujian 350300;Research Institute of Highway,Ministry of Transportation,Beijing 100088)
机构地区:[1]福建师范大学福清分校电子与信息工程学院,福建福清350300 [2]交通运输部公路科学研究所,北京100088
出 处:《福建师大福清分校学报》2017年第5期27-31,98,共6页Journal of Fuqing Branch of Fujian Normal University
基 金:福建省教育厅中青年教师科研项目(JA15573);福建省生态产业绿色技术重点实验室开放项目(XLKF2015-5)
摘 要:斜拉索的索力大小直接决定着斜拉桥的工作状态,采用准确的方法进行合理的索力测试是保证斜拉桥顺利施工和安全运营的必要手段。文章针对目前斜拉桥索力测试中常用的方法进行了阐述,提出了基于MEMS的无线索力测试系统的研制与开发,首先利用频率法推导出索力的一般方程,再通过实验得到索力的频率变化情况计算出索力的大小。最后通过钢箱梁吊装前后的索力变化值来证明这个系统是可以用来测试索力的大小。As cable force decides the working state of the cable-stayed bridge directly,it is necessary to ensure the smooth construction and secure operation by measuring its cable force through some exact methods.This paper illustrates the common methods of cable force testing and puts forward the research and development of the testing system based on MEMS.First the general equation of cable force is deduced by frequency method.Then the cable force is calculated according to the frequency in the experiment.Finally,the variation before and after the installation of steel box girder is employed to prove that the system can be used to test the cable force.
分 类 号:TH112[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.117.151.179