航空厂热处理现状与问题  

Status and Existing Problems of Heat Treatment in Aviation Manufacture Factorys

作　　者：赵志国[1] 华程 李黎[1] 谷云峰[1] 虞文军 ZHAO Zhiguo;HUA Cheng;LI Li;GU Yunfeng;YU Wenjun(AVIC Chengdu Aircraft Design & Research Institute, Chengdu 610091, China;AVIC Chengdu Aircraft Industrial (Group) Co., Ltd., Chengdu 610092, China)

机构地区：[1]航空工业成都飞机设计研究所,成都610091 [2]航空工业成都飞机工业(集团)有限责任公司,成都610092

出　　处：《航空制造技术》2017年第23期59-63,共5页Aeronautical Manufacturing Technology

摘　　要：航空厂用钢、铝合金、钛合金等金属材料的热处理具有牌号品种规格多、质量要求高、工艺类型复杂等特点,随着热处理在航空厂中的被重视程度得到提升,一些长期存在的问题也逐步得到解决。与以往的高度关注热处理结果和合格率相比,航空厂应更加注重对热处理过程参数的控制以及对现有数据潜力的挖掘。简要讨论了几类金属材料的热处理,列举了几点问题并做了简要分析,提出的改进建议供有关人员参考。Due to multiple specifications and variety of metallic materials of aviation industry such as steel,aluminum alloy and titanium alloy etc,heat treatment process of metallic materials has high quality requirement and is complex.With increasing attention on heat treatment in aviation manufacture factories,many long existing problems have been resolved gradually.Compared with emphasis on results and qualification rate of heat treatment previously,more importance should be attached to process parameter control and existing data potentiality exploitation.This thesis briefly describes heat treatment of a few types of metallic materials,puts forward some problems and simple analysis,and proposes some improvement suggestions for the reference of related personnel.

关 键 词：航空厂 金属材料 热处理 质量控制 过程控制 

分 类 号：V261.3[航空宇航科学与技术—航空宇航制造工程]