多通道光量子传感器的设计与应用  

Design and Applications of Multi-channel Quantum Sensor

作　　者：张昕昱 徐景宏[1] 何子力 张放心 李明 刘文[1,2] ZHANG Xinyu;XU Jinghong;HE Zili;ZHANG Fangxin;LI Ming;LIU Wen(Institute of Advanced Technology,University of Science and Technology of China,Hefei 230088,China;School of Physical Sciences,University of Science and Technology of China,Hefei 230026,China)

机构地区：[1]中国科学技术大学先进技术研究院,安徽合肥230088 [2]中国科学技术大学物理学院,安徽合肥230026

出　　处：《照明工程学报》2017年第6期100-105,共6页China Illuminating Engineering Journal

基　　金：安徽省科技厅科技重大专项项目"设施农业光照传感器及智能光照控制系统"(编号16030701093)

摘　　要：对植物生长的光环境的测量是LED植物工厂等都市农业研发和生产的基础。目前,人工光源植物照明多使用蓝光、红光、远红光等单色LED,而光合有效辐射(PAR)光量子传感器测量400~700 nm波段的光量子通量密度,无法同时测量这几种单色LED的光量子通量密度,因而无法实现光质比的实时测量及与其他系统的反馈控制,为此我们提出一种多通道光量子传感器来解决该问题。我们阐述了该传感器的设计原理及结构;推导出不同通道的标定系数表达式,随后应用基于DMX512协议的控制器搭建标定装置,并以红光通道与蓝光通道为例对文章所设计传感器定标,结果表明该传感器拥有很好的线性响应度;最后利用该传感器设计了一套能够控制总光量子通量密度及光质比的智能光环境控制系统。The measurement of plant growth’s luminous environment is the basis of urban agriculture,such as LED plant factory.The PAR quantum sensors,which measure the photon flux of radiation in the spectral interval400~700nm,can’t measure the several intervals which are used in plant lighting simultaneously,but the LED plant factory needs these data and their ratios by far.Therefore,a type of multi-channel quantum sensor is designed to solve this problem.Firstly,the paper expounds the design principle and structure of the sensor.It then elicits the calibration coefficient expression of the sensor’s different channels,and calibrates the unregulated sensors by the PQS-1sensor under the calibration device constructed by controller based on DMX512protocol.Results indicate that the linear response of sensors is good.The article finally designs a set of light environment control system,which can auto control the photon fluxes and light quality ratios,based on the sensors.

关 键 词：多通道 PAR 传感器 植物工厂 标定 光环境控制 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]