交叉孔电化学去除毛刺电场仿真分析  

Electric Field Simulation of Electrochemical Deburring Machining for Internal Cross Hole

作　　者：郭英杰 刘嘉航[2] 李杰 王丽媛[2] 董华军[1,2] GUO Yingjie;LIU Jiahang;LI Jie;WANG Liyuan;DONG Huajun(Stated Grid,Tianjin Pinggao Intelligent Electric Co.Ltd,Tianjin 300300,China;School of Mechanical Engineering,Dalian Jiaotong University,Dalian 116028,China)

机构地区：[1]国家电网天津平高智能电气有限公司,天津300300 [2]大连交通大学机械工程学院,辽宁大连116028

出　　处：《大连交通大学学报》2018年第1期110-114,共5页Journal of Dalian Jiaotong University

基　　金：辽宁省高等学校优秀人才资助项目(LJQ2014046)

摘　　要：电化学加工受电场、流场、温度场等多个物理场相互作用的复杂反应过程.通过计算机仿真软件建立不同电极形状、加工电压和绝缘层位置下电化学加工过程中的电场模型,通过对电场模型的求解得到电化学加工过程中工件加工面的型面变化曲线.仿真结果表明对电极的处理以及降低绝缘层位置能够有效提高表面加工质量,并且得出加工电压与时间曲线图,从而得到优化设计方案和实验参数.The electrochemical machining is a complex chemical reaction process which was influenced by electric field,flow field and temperature field.The different electric field models of the electrochemical machining were established,and the profile curves of the machining face of electrochemical machining process is obtained by the solution of electric field model.According to the simulation results,processing accuracy can be improved by chamfering or rounding the cathode and reducing the position of insulation to the obtain design and experimental parameter.

关 键 词：电化学去毛刺 内交叉孔 电场仿真 

分 类 号：TG662[金属学及工艺—金属切削加工及机床]