Experiment on a Semi-Active In-Car Crib with Joint Application of Regular and Inverted Pendulum Mechanisms Using Scale Model  

作　　者：Kawashima Takeshi 

机构地区：[1]Department of Mechanical Engineering,Kanagawa Institute of Technology

出　　处：《Transactions of Nanjing University of Aeronautics and Astronautics》2018年第1期28-37,共10页南京航空航天大学学报（英文版）

基　　金：supported by a Grant-in-Aid for Scientific Research(No.JSPS KAKENHI NJP24560279)

摘　　要：To reduce the collision shock and risk of injury to an infant in an in-car crib(or in a child safety bed)during a car crash,it is necessary to limit the force acting on the crib below a certain allowable value.To realize this objective,we propose a semi-active in-car crib system with the joint application of regular and inverted pendulum mechanisms.The crib is supported by arms similar to a pendulum,and the pendulum system itself is supported by arms similar to an inverted pendulum.In addition,the arm acting as a regular pendulum is joined with the arm acting as an inverted pendulum through a linking mechanism for simplicity,and the friction torque of the joint connecting the base and the latter arm is controlled using a brake mechanism,which enables the proposed in-car crib to gradually increase the deceleration of the crib and maintain it at around the target value.This system not only reduces the impulsive force but also transfers the force to the infant′s back using a spin control system,i.e.,the impulse force is made to act perpendicularly on the crib.The spin control system was developed in our previous work.The present work focuses on the acceleration control system.A semi-active control law with acceleration feedback is introduced using the sliding mode control theory.Especially,a feedback system of the crib acceleration relative to the vehicle is proposed for the high-vibrational environment.Further,a control experiment using scale model is conducted to confirm the effectiveness,and some results are reported.To reduce the collision shock and risk of injury to an infant in an in-car crib(or in a child safety bed)during a car crash,it is necessary to limit the force acting on the crib below a certain allowable value.To realize this objective,we propose a semi-active in-car crib system with the joint application of regular and inverted pendulum mechanisms.The crib is supported by arms similar to a pendulum,and the pendulum system itself is supported by arms similar to an inverted pendulum.In addition,the arm acting as a regular pendulum is joined with the arm acting as an inverted pendulum through a linking mechanism for simplicity,and the friction torque of the joint connecting the base and the latter arm is controlled using a brake mechanism,which enables the proposed in-car crib to gradually increase the deceleration of the crib and maintain it at around the target value.This system not only reduces the impulsive force but also transfers the force to the infant′s back using a spin control system,i.e.,the impulse force is made to act perpendicularly on the crib.The spin control system was developed in our previous work.The present work focuses on the acceleration control system.A semi-active control law with acceleration feedback is introduced using the sliding mode control theory.Especially,a feedback system of the crib acceleration relative to the vehicle is proposed for the high-vibrational environment.Further,a control experiment using scale model is conducted to confirm the effectiveness,and some results are reported.

关 键 词：shock control OCCUPANT CRASH protection passive safety device child RESTRAINT system impact relaxation 

分 类 号：TN925[电子电信—通信与信息系统]