双切剪下剪刃轴向窜动原因分析及解决措施  

Analysis on Causes Leading to Axial Movement of Lower Shear Blades in Double Shear and Countermeasures for Movement

作　　者：何天庆[1] 王新[2] 姜大鹏[1] 刘发 He Tianqing;Wang Xin;Jiang Dapeng;Liu Fa(Cold Rolled Strip Mill of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China;Wire Rod Mill of Angang Steel Co.,Ltd.,Anshan 114021,Liaoning,China;Harbin Steam Turbine Works,Harbin 150000,Heilongjiang,China)

机构地区：[1]鞍钢股份有限公司冷轧厂,辽宁鞍山114021 [2]鞍钢股份有限公司线材厂,辽宁鞍山114021 [3]哈尔滨汽轮厂,黑龙江哈尔滨150000

出　　处：《鞍钢技术》2018年第2期60-62,70,共4页Angang Technology

摘　　要：针对酸洗机组双切剪下剪刃在运行过程中频繁窜出的问题,计算验证了剪刃锁紧力是否符合要求,分析了剪刃锁紧在实际应用中遇到的具体问题,指出了剪刃锁紧拉杆内的碟簧组失效是导致下剪刃锁不住的原因,通过设计制作专用的剪刃轴向固定装置,解决了双切剪下剪刃窜出问题。In allusion to the problem of the frequent axial movement of lower running shear blades in the double shear on the picking line,the tight locking force for blades was calculated to check if the force was up to the standards or not.And then the specific problems encountered in carrying out the actual operation of locking the blades were analyzed.It was concluded that the failure of the disc springs set in the locking pull rod of the blades caused the failure of locking the lower blades.By designing and making the special axial fastening device for blades,the axial movement problem of the lower shear blades in the double shear was solved.

关 键 词：冷轧 酸洗机组 双切剪 剪刃 轴向窜动 

分 类 号：TG333[金属学及工艺—金属压力加工]