极板分切与清洁化生产  

Plate parting and cleaner production

作　　者：沈旭培 熊正林 方明学[1] 杨新明 SHEN Xupei;XONG Zhenglin;FANG Mingxue;YANG Xinming(Tianneng Battery Group Co.,Ltd.,Huzhou Zhejiang 313100,China)

机构地区：[1]天能电池集团有限公司,浙江湖州313100

出　　处：《蓄电池》2018年第2期91-94,共4页Chinese LABAT Man

摘　　要：采用改变剪切刀片结构的方法,将极板连接处分切成丝状物,使其回收率由70%上升至95%左右,且将分切过程极板的不良率由3%下降至0.3%左右。同时,增加传送机、熔炼炉和环保设备等装置,采用废料直接回收的方法,提高生产效率,改善生产环境。By changing the structure of shear blade,the joints of plates are turned into filaments after the plates are parted.The lead recovery rate of plate joints is increased from 70%to 95%,and the reject ratio of the plates is reduced from 3%to 0.3%.Meanwhile,by increasing conveyor,melting furnace and environmental protection equipment to directly recycle scrap materials,the production efficiency is increased,and the production environment is improved.

关 键 词：铅蓄电池 极板 分切工艺 铅回收 清洁化生产 

分 类 号：TM912.1[电气工程—电力电子与电力传动]